Ihre Suche nach:
287 Ergebnis(se) in 0.17 s
-
DUK10123163_015
FEATURE - Weltpremiere: Lego-Bienenstock
Ferrari Press Agency
Ref 10863
Hive 1
12/09/2019
See Ferrari text
Picture MUST credit : Dvorat Ha’Tavor Apiary Educational Centre
A colony of bees has built new life for itself—inside the world’s first hive made of Lego bricks.Israeli beekeeper and honey producer Dvorat Ha’tavor created a fully functional beehive out of Leo and boasted of using every brick he had, even the small fiddly ones.Dvorat , who runs a bee keeping centre, first used a wooden base as template and built up the bricks around it.He then transferred it to a proper Lego base from where he finished building up the walls and created the roof.His deliberately aimed to make –sue no two adjoining bricks were of the same colour.The slats inside were the honey is made and stored are traditional wooden ones
OPS: The world's first Lego bee hive
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS)
(c) Dukas -
DUK10123163_014
FEATURE - Weltpremiere: Lego-Bienenstock
Ferrari Press Agency
Ref 10863
Hive 1
12/09/2019
See Ferrari text
Picture MUST credit : Dvorat Ha’Tavor Apiary Educational Centre
A colony of bees has built new life for itself—inside the world’s first hive made of Lego bricks.Israeli beekeeper and honey producer Dvorat Ha’tavor created a fully functional beehive out of Leo and boasted of using every brick he had, even the small fiddly ones.Dvorat , who runs a bee keeping centre, first used a wooden base as template and built up the bricks around it.He then transferred it to a proper Lego base from where he finished building up the walls and created the roof.His deliberately aimed to make –sue no two adjoining bricks were of the same colour.The slats inside were the honey is made and stored are traditional wooden ones
OPS: The world's first Lego bee hive under constrruction first beginning with a wooden base as template
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS)
(c) Dukas -
DUK10123163_013
FEATURE - Weltpremiere: Lego-Bienenstock
Ferrari Press Agency
Ref 10863
Hive 1
12/09/2019
See Ferrari text
Picture MUST credit : Dvorat Ha’Tavor Apiary Educational Centre
A colony of bees has built new life for itself—inside the world’s first hive made of Lego bricks.Israeli beekeeper and honey producer Dvorat Ha’tavor created a fully functional beehive out of Leo and boasted of using every brick he had, even the small fiddly ones.Dvorat , who runs a bee keeping centre, first used a wooden base as template and built up the bricks around it.He then transferred it to a proper Lego base from where he finished building up the walls and created the roof.His deliberately aimed to make –sue no two adjoining bricks were of the same colour.The slats inside were the honey is made and stored are traditional wooden ones
OPS: The world's first Lego bee hive with its builder Dvorat Ha'tavor
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS)
(c) Dukas -
DUK10123163_012
FEATURE - Weltpremiere: Lego-Bienenstock
Ferrari Press Agency
Ref 10863
Hive 1
12/09/2019
See Ferrari text
Picture MUST credit : Dvorat Ha’Tavor Apiary Educational Centre
A colony of bees has built new life for itself—inside the world’s first hive made of Lego bricks.Israeli beekeeper and honey producer Dvorat Ha’tavor created a fully functional beehive out of Leo and boasted of using every brick he had, even the small fiddly ones.Dvorat , who runs a bee keeping centre, first used a wooden base as template and built up the bricks around it.He then transferred it to a proper Lego base from where he finished building up the walls and created the roof.His deliberately aimed to make –sue no two adjoining bricks were of the same colour.The slats inside were the honey is made and stored are traditional wooden ones
OPS: The world's first Lego bee hive
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS)
(c) Dukas -
DUK10123163_011
FEATURE - Weltpremiere: Lego-Bienenstock
Ferrari Press Agency
Ref 10863
Hive 1
12/09/2019
See Ferrari text
Picture MUST credit : Dvorat Ha’Tavor Apiary Educational Centre
A colony of bees has built new life for itself—inside the world’s first hive made of Lego bricks.Israeli beekeeper and honey producer Dvorat Ha’tavor created a fully functional beehive out of Leo and boasted of using every brick he had, even the small fiddly ones.Dvorat , who runs a bee keeping centre, first used a wooden base as template and built up the bricks around it.He then transferred it to a proper Lego base from where he finished building up the walls and created the roof.His deliberately aimed to make –sue no two adjoining bricks were of the same colour.The slats inside were the honey is made and stored are traditional wooden ones
OPS: The world's first Lego bee hive under constrruction
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS)
(c) Dukas -
DUK10123163_010
FEATURE - Weltpremiere: Lego-Bienenstock
Ferrari Press Agency
Ref 10863
Hive 1
12/09/2019
See Ferrari text
Picture MUST credit : Dvorat Ha’Tavor Apiary Educational Centre
A colony of bees has built new life for itself—inside the world’s first hive made of Lego bricks.Israeli beekeeper and honey producer Dvorat Ha’tavor created a fully functional beehive out of Leo and boasted of using every brick he had, even the small fiddly ones.Dvorat , who runs a bee keeping centre, first used a wooden base as template and built up the bricks around it.He then transferred it to a proper Lego base from where he finished building up the walls and created the roof.His deliberately aimed to make –sue no two adjoining bricks were of the same colour.The slats inside were the honey is made and stored are traditional wooden ones
OPS: The world's first Lego bee hive
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS)
(c) Dukas -
DUK10123163_009
FEATURE - Weltpremiere: Lego-Bienenstock
Ferrari Press Agency
Ref 10863
Hive 1
12/09/2019
See Ferrari text
Picture MUST credit : Dvorat Ha’Tavor Apiary Educational Centre
A colony of bees has built new life for itself—inside the world’s first hive made of Lego bricks.Israeli beekeeper and honey producer Dvorat Ha’tavor created a fully functional beehive out of Leo and boasted of using every brick he had, even the small fiddly ones.Dvorat , who runs a bee keeping centre, first used a wooden base as template and built up the bricks around it.He then transferred it to a proper Lego base from where he finished building up the walls and created the roof.His deliberately aimed to make –sue no two adjoining bricks were of the same colour.The slats inside were the honey is made and stored are traditional wooden ones
OPS: Lego bee hive builder Dvorat Ha'tavor
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS)
(c) Dukas -
DUK10123163_008
FEATURE - Weltpremiere: Lego-Bienenstock
Ferrari Press Agency
Ref 10863
Hive 1
12/09/2019
See Ferrari text
Picture MUST credit : Dvorat Ha’Tavor Apiary Educational Centre
A colony of bees has built new life for itself—inside the world’s first hive made of Lego bricks.Israeli beekeeper and honey producer Dvorat Ha’tavor created a fully functional beehive out of Leo and boasted of using every brick he had, even the small fiddly ones.Dvorat , who runs a bee keeping centre, first used a wooden base as template and built up the bricks around it.He then transferred it to a proper Lego base from where he finished building up the walls and created the roof.His deliberately aimed to make –sue no two adjoining bricks were of the same colour.The slats inside were the honey is made and stored are traditional wooden ones
OPS: The world's first Lego bee hive
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS)
(c) Dukas -
DUK10123163_007
FEATURE - Weltpremiere: Lego-Bienenstock
Ferrari Press Agency
Ref 10863
Hive 1
12/09/2019
See Ferrari text
Picture MUST credit : Dvorat Ha’Tavor Apiary Educational Centre
A colony of bees has built new life for itself—inside the world’s first hive made of Lego bricks.Israeli beekeeper and honey producer Dvorat Ha’tavor created a fully functional beehive out of Leo and boasted of using every brick he had, even the small fiddly ones.Dvorat , who runs a bee keeping centre, first used a wooden base as template and built up the bricks around it.He then transferred it to a proper Lego base from where he finished building up the walls and created the roof.His deliberately aimed to make –sue no two adjoining bricks were of the same colour.The slats inside were the honey is made and stored are traditional wooden ones
OPS: The world's first Lego bee hiveunder constrruction . It used around 7,000 pieces
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS)
(c) Dukas -
DUK10123163_006
FEATURE - Weltpremiere: Lego-Bienenstock
Ferrari Press Agency
Ref 10863
Hive 1
12/09/2019
See Ferrari text
Picture MUST credit : Dvorat Ha’Tavor Apiary Educational Centre
A colony of bees has built new life for itself—inside the world’s first hive made of Lego bricks.Israeli beekeeper and honey producer Dvorat Ha’tavor created a fully functional beehive out of Leo and boasted of using every brick he had, even the small fiddly ones.Dvorat , who runs a bee keeping centre, first used a wooden base as template and built up the bricks around it.He then transferred it to a proper Lego base from where he finished building up the walls and created the roof.His deliberately aimed to make –sue no two adjoining bricks were of the same colour.The slats inside were the honey is made and stored are traditional wooden ones
OPS: The world's first Lego bee hive
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS)
(c) Dukas -
DUK10123163_005
FEATURE - Weltpremiere: Lego-Bienenstock
Ferrari Press Agency
Ref 10863
Hive 1
12/09/2019
See Ferrari text
Picture MUST credit : Dvorat Ha’Tavor Apiary Educational Centre
A colony of bees has built new life for itself—inside the world’s first hive made of Lego bricks.Israeli beekeeper and honey producer Dvorat Ha’tavor created a fully functional beehive out of Leo and boasted of using every brick he had, even the small fiddly ones.Dvorat , who runs a bee keeping centre, first used a wooden base as template and built up the bricks around it.He then transferred it to a proper Lego base from where he finished building up the walls and created the roof.His deliberately aimed to make –sue no two adjoining bricks were of the same colour.The slats inside were the honey is made and stored are traditional wooden ones
OPS: The world's first Lego bee hive
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS)
(c) Dukas -
DUK10123163_004
FEATURE - Weltpremiere: Lego-Bienenstock
Ferrari Press Agency
Ref 10863
Hive 1
12/09/2019
See Ferrari text
Picture MUST credit : Dvorat Ha’Tavor Apiary Educational Centre
A colony of bees has built new life for itself—inside the world’s first hive made of Lego bricks.Israeli beekeeper and honey producer Dvorat Ha’tavor created a fully functional beehive out of Leo and boasted of using every brick he had, even the small fiddly ones.Dvorat , who runs a bee keeping centre, first used a wooden base as template and built up the bricks around it.He then transferred it to a proper Lego base from where he finished building up the walls and created the roof.His deliberately aimed to make –sue no two adjoining bricks were of the same colour.The slats inside were the honey is made and stored are traditional wooden ones
OPS: The world's first Lego bee hive
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS)
(c) Dukas -
DUK10123163_003
FEATURE - Weltpremiere: Lego-Bienenstock
Ferrari Press Agency
Ref 10863
Hive 1
12/09/2019
See Ferrari text
Picture MUST credit : Dvorat Ha’Tavor Apiary Educational Centre
A colony of bees has built new life for itself—inside the world’s first hive made of Lego bricks.Israeli beekeeper and honey producer Dvorat Ha’tavor created a fully functional beehive out of Leo and boasted of using every brick he had, even the small fiddly ones.Dvorat , who runs a bee keeping centre, first used a wooden base as template and built up the bricks around it.He then transferred it to a proper Lego base from where he finished building up the walls and created the roof.His deliberately aimed to make –sue no two adjoining bricks were of the same colour.The slats inside were the honey is made and stored are traditional wooden ones
OPS: The world's first Lego bee hive
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS)
(c) Dukas -
DUK10123163_002
FEATURE - Weltpremiere: Lego-Bienenstock
Ferrari Press Agency
Ref 10863
Hive 1
12/09/2019
See Ferrari text
Picture MUST credit : Dvorat Ha’Tavor Apiary Educational Centre
A colony of bees has built new life for itself—inside the world’s first hive made of Lego bricks.Israeli beekeeper and honey producer Dvorat Ha’tavor created a fully functional beehive out of Leo and boasted of using every brick he had, even the small fiddly ones.Dvorat , who runs a bee keeping centre, first used a wooden base as template and built up the bricks around it.He then transferred it to a proper Lego base from where he finished building up the walls and created the roof.His deliberately aimed to make –sue no two adjoining bricks were of the same colour.The slats inside were the honey is made and stored are traditional wooden ones
OPS: The world's first Lego bee hive
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS)
(c) Dukas -
DUK10123163_001
FEATURE - Weltpremiere: Lego-Bienenstock
Ferrari Press Agency
Ref 10863
Hive 1
12/09/2019
See Ferrari text
Picture MUST credit : Dvorat Ha’Tavor Apiary Educational Centre
A colony of bees has built new life for itself—inside the world’s first hive made of Lego bricks.Israeli beekeeper and honey producer Dvorat Ha’tavor created a fully functional beehive out of Leo and boasted of using every brick he had, even the small fiddly ones.Dvorat , who runs a bee keeping centre, first used a wooden base as template and built up the bricks around it.He then transferred it to a proper Lego base from where he finished building up the walls and created the roof.His deliberately aimed to make –sue no two adjoining bricks were of the same colour.The slats inside were the honey is made and stored are traditional wooden ones
OPS: The world's first Lego bee hive
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS)
(c) Dukas -
DUKAS_25136668_REX
Google headquarters, Central Saint Giles, Covent Garden, London, Britain - 06 Aug 2012
Must credit PENSON/Rex Features
Mandatory Credit: Photo by PENSON / Rex Features (1811356s)
Jet fighter ejector seat
A Peek Inside Google's London Headquarters
It features a secret garden, 'Granny flat' interiors and an allotment - welcome to Google's new London headquarters.
The 160,000 sq ft hub features cutting-edge design that offers a quirky take on the traditional office.
Occupying half of the ultra-modern Central Saint Giles development in Covent Garden over five floors, renowned interior designers PENSON were given the task of creating a vibrant workspace.
The result is amazing variation of work and lounging space which finds room for 1,250 non-traditional desks.
A space called Granny's Flat is furnished with chintzy chairs and fittings that wouldn't look out of place in an elderly relative's lounge, while the Lala Library hosts a giant semi-circle white sofa adorned with pillows and surrounded by arty and inspirational books.
Surreal workspaces have tongue-in-cheek names such as the Velourmptious snug, a green, padded homage to the traditional British pub, and Snug-lushness, a garish flower-print padded bench seat.
An area dubbed the Town Hall allows seating for 200 people and features velvet curtains, exposed ceilings and a video wall, while the Market Square is a rustic cafeteria area.
For active staff members there is a gym and dance studio, a 'bikedry' for cycling gear storage and a shower block for those sweaty from the morning workout, cycle or commute.
For those really wanting to escape the office, a 'Hedge Your Bets' secret garden on the roof terrace affords stunning views of London surrounded by grass and foliage - all with wi-fi connection for laptop work.
Eco considerations are at the forefront of design with a high content of reclaimed or recycled materials employed and the use of water-based products and timber floor boards with Eco plyw...
For more information visit http://www.rexfeatures.com/stacklink/IAKPGGBBK
DUKAS/REX -
DUKAS_185323949_NUR
Exshibition Fashion Product Of Recycled And Ecoprinted Materials In Indonesia
A booth displays fashion products, including kebaya and batik, during an exhibition of fashion items made from recycled materials and featuring ecoprinted motifs at a mall in Malang, East Java, Indonesia, on May 25, 2025. The exhibition features designer and small business fashion products sold from USD 3.45 to USD 61.51 and is organized by Bank Rakyat Indonesia (BRI) (Photo by Aman Rochman/NurPhoto). -
DUKAS_185323944_NUR
Exshibition Fashion Product Of Recycled And Ecoprinted Materials In Indonesia
A booth displays fashion products, including kebaya and batik, during an exhibition of fashion items made from recycled materials and featuring ecoprinted motifs at a mall in Malang, East Java, Indonesia, on May 25, 2025. The exhibition features designer and small business fashion products sold from USD 3.45 to USD 61.51 and is organized by Bank Rakyat Indonesia (BRI) (Photo by Aman Rochman/NurPhoto). -
DUKAS_185323936_NUR
Exshibition Fashion Product Of Recycled And Ecoprinted Materials In Indonesia
A designer displays accessories made from recycled electronic waste at an exhibition of recycled fashion products at a mall in Malang, East Java, Indonesia, on May 25, 2025. The exhibition of designer and small business fashion products sells items ranging from USD 3.45 to USD 61.51 and is organized by Bank Rakyat Indonesia (BRI) (Photo by Aman Rochman/NurPhoto). -
DUKAS_185323912_NUR
Exshibition Fashion Product Of Recycled And Ecoprinted Materials In Indonesia
A booth displays fashion products, including kebaya and batik, during an exhibition of fashion items made from recycled materials and featuring ecoprinted motifs at a mall in Malang, East Java, Indonesia, on May 25, 2025. The exhibition features designer and small business fashion products sold from USD 3.45 to USD 61.51 and is organized by Bank Rakyat Indonesia (BRI) (Photo by Aman Rochman/NurPhoto). -
DUKAS_185323909_NUR
Exshibition Fashion Product Of Recycled And Ecoprinted Materials In Indonesia
A booth displays fashion products, including kebaya and batik, during an exhibition of fashion items made from recycled materials and featuring ecoprinted motifs at a mall in Malang, East Java, Indonesia, on May 25, 2025. The exhibition features designer and small business fashion products sold from USD 3.45 to USD 61.51 and is organized by Bank Rakyat Indonesia (BRI) (Photo by Aman Rochman/NurPhoto). -
DUKAS_185323906_NUR
Exshibition Fashion Product Of Recycled And Ecoprinted Materials In Indonesia
A booth displays fashion products, including kebaya and batik, during an exhibition of fashion items made from recycled materials and featuring ecoprinted motifs at a mall in Malang, East Java, Indonesia, on May 25, 2025. The exhibition features designer and small business fashion products sold from USD 3.45 to USD 61.51 and is organized by Bank Rakyat Indonesia (BRI) (Photo by Aman Rochman/NurPhoto). -
DUKAS_181748609_BES
Tiny Camper est un mobil-home créé en 3D à partir de 7.000 bouteilles en plastique recyclées
Picture MUST credit: Lemki Robotics A mobile home, 3D printed from 7,000 recycled plastic bottles, has hit the road. Called Tiny Camper, the bijou teardrop-shaped creation is eight metres long and just over three metres tall and wide. The recycled polypropylene from the bottles is reinforced with fibreglass. The 9 mm thick walls are able to maintain strength yet the shell weighs only 250 kg. The interior has integrated sleeping area , a kitchenette and storage plus a TV screen. There is even ambient lighting which is controlled remotely from a handset. Tiny Camper also comes with integrated batteries that can be connected to solar panels to make the caravan self-sufficient. Integrated sensors monitor water level, battery charge and control temperature; It was created by Ukrainian-German company Lemki Robotix. Picture supplied by JLPPA
JLPPA / Bestimage -
DUKAS_181748603_BES
Tiny Camper est un mobil-home créé en 3D à partir de 7.000 bouteilles en plastique recyclées
Picture MUST credit: Lemki Robotics A mobile home, 3D printed from 7,000 recycled plastic bottles, has hit the road. Called Tiny Camper, the bijou teardrop-shaped creation is eight metres long and just over three metres tall and wide. The recycled polypropylene from the bottles is reinforced with fibreglass. The 9 mm thick walls are able to maintain strength yet the shell weighs only 250 kg. The interior has integrated sleeping area , a kitchenette and storage plus a TV screen. There is even ambient lighting which is controlled remotely from a handset. Tiny Camper also comes with integrated batteries that can be connected to solar panels to make the caravan self-sufficient. Integrated sensors monitor water level, battery charge and control temperature; It was created by Ukrainian-German company Lemki Robotix. Picture supplied by JLPPA
JLPPA / Bestimage -
DUKAS_181748597_BES
Tiny Camper est un mobil-home créé en 3D à partir de 7.000 bouteilles en plastique recyclées
Picture MUST credit: Lemki Robotics A mobile home, 3D printed from 7,000 recycled plastic bottles, has hit the road. Called Tiny Camper, the bijou teardrop-shaped creation is eight metres long and just over three metres tall and wide. The recycled polypropylene from the bottles is reinforced with fibreglass. The 9 mm thick walls are able to maintain strength yet the shell weighs only 250 kg. The interior has integrated sleeping area , a kitchenette and storage plus a TV screen. There is even ambient lighting which is controlled remotely from a handset. Tiny Camper also comes with integrated batteries that can be connected to solar panels to make the caravan self-sufficient. Integrated sensors monitor water level, battery charge and control temperature; It was created by Ukrainian-German company Lemki Robotix. Picture supplied by JLPPA
JLPPA / Bestimage -
DUKAS_181748591_BES
Tiny Camper est un mobil-home créé en 3D à partir de 7.000 bouteilles en plastique recyclées
Picture MUST credit: Lemki Robotics A mobile home, 3D printed from 7,000 recycled plastic bottles, has hit the road. Called Tiny Camper, the bijou teardrop-shaped creation is eight metres long and just over three metres tall and wide. The recycled polypropylene from the bottles is reinforced with fibreglass. The 9 mm thick walls are able to maintain strength yet the shell weighs only 250 kg. The interior has integrated sleeping area , a kitchenette and storage plus a TV screen. There is even ambient lighting which is controlled remotely from a handset. Tiny Camper also comes with integrated batteries that can be connected to solar panels to make the caravan self-sufficient. Integrated sensors monitor water level, battery charge and control temperature; It was created by Ukrainian-German company Lemki Robotix. Picture supplied by JLPPA
JLPPA / Bestimage -
DUKAS_181748586_BES
Tiny Camper est un mobil-home créé en 3D à partir de 7.000 bouteilles en plastique recyclées
Picture MUST credit: Lemki Robotics A mobile home, 3D printed from 7,000 recycled plastic bottles, has hit the road. Called Tiny Camper, the bijou teardrop-shaped creation is eight metres long and just over three metres tall and wide. The recycled polypropylene from the bottles is reinforced with fibreglass. The 9 mm thick walls are able to maintain strength yet the shell weighs only 250 kg. The interior has integrated sleeping area , a kitchenette and storage plus a TV screen. There is even ambient lighting which is controlled remotely from a handset. Tiny Camper also comes with integrated batteries that can be connected to solar panels to make the caravan self-sufficient. Integrated sensors monitor water level, battery charge and control temperature; It was created by Ukrainian-German company Lemki Robotix. Picture supplied by JLPPA
JLPPA / Bestimage -
DUKAS_181748581_BES
Tiny Camper est un mobil-home créé en 3D à partir de 7.000 bouteilles en plastique recyclées
Picture MUST credit: Lemki Robotics A mobile home, 3D printed from 7,000 recycled plastic bottles, has hit the road. Called Tiny Camper, the bijou teardrop-shaped creation is eight metres long and just over three metres tall and wide. The recycled polypropylene from the bottles is reinforced with fibreglass. The 9 mm thick walls are able to maintain strength yet the shell weighs only 250 kg. The interior has integrated sleeping area , a kitchenette and storage plus a TV screen. There is even ambient lighting which is controlled remotely from a handset. Tiny Camper also comes with integrated batteries that can be connected to solar panels to make the caravan self-sufficient. Integrated sensors monitor water level, battery charge and control temperature; It was created by Ukrainian-German company Lemki Robotix. Picture supplied by JLPPA
JLPPA / Bestimage -
DUKAS_181748576_BES
Tiny Camper est un mobil-home créé en 3D à partir de 7.000 bouteilles en plastique recyclées
Picture MUST credit: Lemki Robotics A mobile home, 3D printed from 7,000 recycled plastic bottles, has hit the road. Called Tiny Camper, the bijou teardrop-shaped creation is eight metres long and just over three metres tall and wide. The recycled polypropylene from the bottles is reinforced with fibreglass. The 9 mm thick walls are able to maintain strength yet the shell weighs only 250 kg. The interior has integrated sleeping area , a kitchenette and storage plus a TV screen. There is even ambient lighting which is controlled remotely from a handset. Tiny Camper also comes with integrated batteries that can be connected to solar panels to make the caravan self-sufficient. Integrated sensors monitor water level, battery charge and control temperature; It was created by Ukrainian-German company Lemki Robotix. Picture supplied by JLPPA
JLPPA / Bestimage -
DUKAS_181748571_BES
Tiny Camper est un mobil-home créé en 3D à partir de 7.000 bouteilles en plastique recyclées
Picture MUST credit: Lemki Robotics A mobile home, 3D printed from 7,000 recycled plastic bottles, has hit the road. Called Tiny Camper, the bijou teardrop-shaped creation is eight metres long and just over three metres tall and wide. The recycled polypropylene from the bottles is reinforced with fibreglass. The 9 mm thick walls are able to maintain strength yet the shell weighs only 250 kg. The interior has integrated sleeping area , a kitchenette and storage plus a TV screen. There is even ambient lighting which is controlled remotely from a handset. Tiny Camper also comes with integrated batteries that can be connected to solar panels to make the caravan self-sufficient. Integrated sensors monitor water level, battery charge and control temperature; It was created by Ukrainian-German company Lemki Robotix. Picture supplied by JLPPA
JLPPA / Bestimage -
DUKAS_181748567_BES
Tiny Camper est un mobil-home créé en 3D à partir de 7.000 bouteilles en plastique recyclées
Picture MUST credit: Lemki Robotics A mobile home, 3D printed from 7,000 recycled plastic bottles, has hit the road. Called Tiny Camper, the bijou teardrop-shaped creation is eight metres long and just over three metres tall and wide. The recycled polypropylene from the bottles is reinforced with fibreglass. The 9 mm thick walls are able to maintain strength yet the shell weighs only 250 kg. The interior has integrated sleeping area , a kitchenette and storage plus a TV screen. There is even ambient lighting which is controlled remotely from a handset. Tiny Camper also comes with integrated batteries that can be connected to solar panels to make the caravan self-sufficient. Integrated sensors monitor water level, battery charge and control temperature; It was created by Ukrainian-German company Lemki Robotix. Picture supplied by JLPPA
JLPPA / Bestimage -
DUKAS_181733660_FER
3D printed mobile home made from recycled plastic bottles.
Ferrari Press Agency
Tiny Camper 1
Ref 16580
26/02/2025
See Ferrari pictures
Picture MUST credit: Lemki Robotics
A mobile home, 3D printed from 7,000 recycled plastic bottles, has hit the road.
Called Tiny Camper, the bijou teardrop-shaped creation is eight metres long and just over three metres tall and wide.
The recycled polypropylene from the bottles is reinforced with fibreglass.
The 9 mm thick walls are able to maintain strength yet the shell weighs only 250 kg.
The interior has integrated sleeping area , a kitchenette and storage plus a TV screen.
There is even ambient lighting which is controlled remotely from a handset.
Tiny Camper also comes with integrated batteries that can be connected to solar panels to make the caravan self-sufficient.
Integrated sensors monitor water level, battery charge and control temperature;
It was created by Ukrainian-German company Lemki Robotix.
OPS: The 3D printed Tiny Camper made from 7,000 recycled plastic bottles.
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS) -
DUKAS_181733655_FER
3D printed mobile home made from recycled plastic bottles.
Ferrari Press Agency
Tiny Camper 1
Ref 16580
26/02/2025
See Ferrari pictures
Picture MUST credit: Lemki Robotics
A mobile home, 3D printed from 7,000 recycled plastic bottles, has hit the road.
Called Tiny Camper, the bijou teardrop-shaped creation is eight metres long and just over three metres tall and wide.
The recycled polypropylene from the bottles is reinforced with fibreglass.
The 9 mm thick walls are able to maintain strength yet the shell weighs only 250 kg.
The interior has integrated sleeping area , a kitchenette and storage plus a TV screen.
There is even ambient lighting which is controlled remotely from a handset.
Tiny Camper also comes with integrated batteries that can be connected to solar panels to make the caravan self-sufficient.
Integrated sensors monitor water level, battery charge and control temperature;
It was created by Ukrainian-German company Lemki Robotix.
OPS: The 3D printed Tiny Camper made from 7,000 recycled plastic bottles.
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS) -
DUKAS_181733650_FER
3D printed mobile home made from recycled plastic bottles.
Ferrari Press Agency
Tiny Camper 1
Ref 16580
26/02/2025
See Ferrari pictures
Picture MUST credit: Lemki Robotics
A mobile home, 3D printed from 7,000 recycled plastic bottles, has hit the road.
Called Tiny Camper, the bijou teardrop-shaped creation is eight metres long and just over three metres tall and wide.
The recycled polypropylene from the bottles is reinforced with fibreglass.
The 9 mm thick walls are able to maintain strength yet the shell weighs only 250 kg.
The interior has integrated sleeping area , a kitchenette and storage plus a TV screen.
There is even ambient lighting which is controlled remotely from a handset.
Tiny Camper also comes with integrated batteries that can be connected to solar panels to make the caravan self-sufficient.
Integrated sensors monitor water level, battery charge and control temperature;
It was created by Ukrainian-German company Lemki Robotix.
OPS: The 3D printed Tiny Camper made from 7,000 recycled plastic bottles.
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS) -
DUKAS_181733645_FER
3D printed mobile home made from recycled plastic bottles.
Ferrari Press Agency
Tiny Camper 1
Ref 16580
26/02/2025
See Ferrari pictures
Picture MUST credit: Lemki Robotics
A mobile home, 3D printed from 7,000 recycled plastic bottles, has hit the road.
Called Tiny Camper, the bijou teardrop-shaped creation is eight metres long and just over three metres tall and wide.
The recycled polypropylene from the bottles is reinforced with fibreglass.
The 9 mm thick walls are able to maintain strength yet the shell weighs only 250 kg.
The interior has integrated sleeping area , a kitchenette and storage plus a TV screen.
There is even ambient lighting which is controlled remotely from a handset.
Tiny Camper also comes with integrated batteries that can be connected to solar panels to make the caravan self-sufficient.
Integrated sensors monitor water level, battery charge and control temperature;
It was created by Ukrainian-German company Lemki Robotix.
OPS: The 3D printed Tiny Camper made from 7,000 recycled plastic bottles.
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS) -
DUKAS_181733640_FER
3D printed mobile home made from recycled plastic bottles.
Ferrari Press Agency
Tiny Camper 1
Ref 16580
26/02/2025
See Ferrari pictures
Picture MUST credit: Lemki Robotics
A mobile home, 3D printed from 7,000 recycled plastic bottles, has hit the road.
Called Tiny Camper, the bijou teardrop-shaped creation is eight metres long and just over three metres tall and wide.
The recycled polypropylene from the bottles is reinforced with fibreglass.
The 9 mm thick walls are able to maintain strength yet the shell weighs only 250 kg.
The interior has integrated sleeping area , a kitchenette and storage plus a TV screen.
There is even ambient lighting which is controlled remotely from a handset.
Tiny Camper also comes with integrated batteries that can be connected to solar panels to make the caravan self-sufficient.
Integrated sensors monitor water level, battery charge and control temperature;
It was created by Ukrainian-German company Lemki Robotix.
OPS: The 3D printed Tiny Camper made from 7,000 recycled plastic bottles.
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS) -
DUKAS_181733635_FER
3D printed mobile home made from recycled plastic bottles.
Ferrari Press Agency
Tiny Camper 1
Ref 16580
26/02/2025
See Ferrari pictures
Picture MUST credit: Lemki Robotics
A mobile home, 3D printed from 7,000 recycled plastic bottles, has hit the road.
Called Tiny Camper, the bijou teardrop-shaped creation is eight metres long and just over three metres tall and wide.
The recycled polypropylene from the bottles is reinforced with fibreglass.
The 9 mm thick walls are able to maintain strength yet the shell weighs only 250 kg.
The interior has integrated sleeping area , a kitchenette and storage plus a TV screen.
There is even ambient lighting which is controlled remotely from a handset.
Tiny Camper also comes with integrated batteries that can be connected to solar panels to make the caravan self-sufficient.
Integrated sensors monitor water level, battery charge and control temperature;
It was created by Ukrainian-German company Lemki Robotix.
OPS: The 3D printed Tiny Camper made from 7,000 recycled plastic bottles.
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS) -
DUKAS_181733630_FER
3D printed mobile home made from recycled plastic bottles.
Ferrari Press Agency
Tiny Camper 1
Ref 16580
26/02/2025
See Ferrari pictures
Picture MUST credit: Lemki Robotics
A mobile home, 3D printed from 7,000 recycled plastic bottles, has hit the road.
Called Tiny Camper, the bijou teardrop-shaped creation is eight metres long and just over three metres tall and wide.
The recycled polypropylene from the bottles is reinforced with fibreglass.
The 9 mm thick walls are able to maintain strength yet the shell weighs only 250 kg.
The interior has integrated sleeping area , a kitchenette and storage plus a TV screen.
There is even ambient lighting which is controlled remotely from a handset.
Tiny Camper also comes with integrated batteries that can be connected to solar panels to make the caravan self-sufficient.
Integrated sensors monitor water level, battery charge and control temperature;
It was created by Ukrainian-German company Lemki Robotix.
OPS: The 3D printed Tiny Camper made from 7,000 recycled plastic bottles.
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS) -
DUKAS_181733625_FER
3D printed mobile home made from recycled plastic bottles.
Ferrari Press Agency
Tiny Camper 1
Ref 16580
26/02/2025
See Ferrari pictures
Picture MUST credit: Lemki Robotics
A mobile home, 3D printed from 7,000 recycled plastic bottles, has hit the road.
Called Tiny Camper, the bijou teardrop-shaped creation is eight metres long and just over three metres tall and wide.
The recycled polypropylene from the bottles is reinforced with fibreglass.
The 9 mm thick walls are able to maintain strength yet the shell weighs only 250 kg.
The interior has integrated sleeping area , a kitchenette and storage plus a TV screen.
There is even ambient lighting which is controlled remotely from a handset.
Tiny Camper also comes with integrated batteries that can be connected to solar panels to make the caravan self-sufficient.
Integrated sensors monitor water level, battery charge and control temperature;
It was created by Ukrainian-German company Lemki Robotix.
OPS: The 3D printed Tiny Camper made from 7,000 recycled plastic bottles.
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS) -
DUKAS_181733618_FER
3D printed mobile home made from recycled plastic bottles.
Ferrari Press Agency
Tiny Camper 1
Ref 16580
26/02/2025
See Ferrari pictures
Picture MUST credit: Lemki Robotics
A mobile home, 3D printed from 7,000 recycled plastic bottles, has hit the road.
Called Tiny Camper, the bijou teardrop-shaped creation is eight metres long and just over three metres tall and wide.
The recycled polypropylene from the bottles is reinforced with fibreglass.
The 9 mm thick walls are able to maintain strength yet the shell weighs only 250 kg.
The interior has integrated sleeping area , a kitchenette and storage plus a TV screen.
There is even ambient lighting which is controlled remotely from a handset.
Tiny Camper also comes with integrated batteries that can be connected to solar panels to make the caravan self-sufficient.
Integrated sensors monitor water level, battery charge and control temperature;
It was created by Ukrainian-German company Lemki Robotix.
OPS: The 3D printed Tiny Camper made from 7,000 recycled plastic bottles.
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS) -
DUKAS_181733611_FER
3D printed mobile home made from recycled plastic bottles.
Ferrari Press Agency
Tiny Camper 1
Ref 16580
26/02/2025
See Ferrari pictures
Picture MUST credit: Lemki Robotics
A mobile home, 3D printed from 7,000 recycled plastic bottles, has hit the road.
Called Tiny Camper, the bijou teardrop-shaped creation is eight metres long and just over three metres tall and wide.
The recycled polypropylene from the bottles is reinforced with fibreglass.
The 9 mm thick walls are able to maintain strength yet the shell weighs only 250 kg.
The interior has integrated sleeping area , a kitchenette and storage plus a TV screen.
There is even ambient lighting which is controlled remotely from a handset.
Tiny Camper also comes with integrated batteries that can be connected to solar panels to make the caravan self-sufficient.
Integrated sensors monitor water level, battery charge and control temperature;
It was created by Ukrainian-German company Lemki Robotix.
OPS: The 3D printed Tiny Camper made from 7,000 recycled plastic bottles.
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS) -
DUKAS_181733604_FER
3D printed mobile home made from recycled plastic bottles.
Ferrari Press Agency
Tiny Camper 1
Ref 16580
26/02/2025
See Ferrari pictures
Picture MUST credit: Lemki Robotics
A mobile home, 3D printed from 7,000 recycled plastic bottles, has hit the road.
Called Tiny Camper, the bijou teardrop-shaped creation is eight metres long and just over three metres tall and wide.
The recycled polypropylene from the bottles is reinforced with fibreglass.
The 9 mm thick walls are able to maintain strength yet the shell weighs only 250 kg.
The interior has integrated sleeping area , a kitchenette and storage plus a TV screen.
There is even ambient lighting which is controlled remotely from a handset.
Tiny Camper also comes with integrated batteries that can be connected to solar panels to make the caravan self-sufficient.
Integrated sensors monitor water level, battery charge and control temperature;
It was created by Ukrainian-German company Lemki Robotix.
OPS: The 3D printed Tiny Camper made from 7,000 recycled plastic bottles.
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS) -
DUKAS_181733597_FER
3D printed mobile home made from recycled plastic bottles.
Ferrari Press Agency
Tiny Camper 1
Ref 16580
26/02/2025
See Ferrari pictures
Picture MUST credit: Lemki Robotics
A mobile home, 3D printed from 7,000 recycled plastic bottles, has hit the road.
Called Tiny Camper, the bijou teardrop-shaped creation is eight metres long and just over three metres tall and wide.
The recycled polypropylene from the bottles is reinforced with fibreglass.
The 9 mm thick walls are able to maintain strength yet the shell weighs only 250 kg.
The interior has integrated sleeping area , a kitchenette and storage plus a TV screen.
There is even ambient lighting which is controlled remotely from a handset.
Tiny Camper also comes with integrated batteries that can be connected to solar panels to make the caravan self-sufficient.
Integrated sensors monitor water level, battery charge and control temperature;
It was created by Ukrainian-German company Lemki Robotix.
OPS: The 3D printed Tiny Camper made from 7,000 recycled plastic bottles.
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS) -
DUKAS_181733711_FER
3D printed mobile home made from recycled plastic bottles.
Ferrari Press Agency
Tiny Camper 1
Ref 16580
26/02/2025
See Ferrari pictures
Picture MUST credit: Lemki Robotics
A mobile home, 3D printed from 7,000 recycled plastic bottles, has hit the road.
Called Tiny Camper, the bijou teardrop-shaped creation is eight metres long and just over three metres tall and wide.
The recycled polypropylene from the bottles is reinforced with fibreglass.
The 9 mm thick walls are able to maintain strength yet the shell weighs only 250 kg.
The interior has integrated sleeping area , a kitchenette and storage plus a TV screen.
There is even ambient lighting which is controlled remotely from a handset.
Tiny Camper also comes with integrated batteries that can be connected to solar panels to make the caravan self-sufficient.
Integrated sensors monitor water level, battery charge and control temperature;
It was created by Ukrainian-German company Lemki Robotix.
OPS: The 3D printed Tiny Camper made from 7,000 recycled plastic bottles.
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS) -
DUKAS_181733705_FER
3D printed mobile home made from recycled plastic bottles.
Ferrari Press Agency
Tiny Camper 1
Ref 16580
26/02/2025
See Ferrari pictures
Picture MUST credit: Lemki Robotics
A mobile home, 3D printed from 7,000 recycled plastic bottles, has hit the road.
Called Tiny Camper, the bijou teardrop-shaped creation is eight metres long and just over three metres tall and wide.
The recycled polypropylene from the bottles is reinforced with fibreglass.
The 9 mm thick walls are able to maintain strength yet the shell weighs only 250 kg.
The interior has integrated sleeping area , a kitchenette and storage plus a TV screen.
There is even ambient lighting which is controlled remotely from a handset.
Tiny Camper also comes with integrated batteries that can be connected to solar panels to make the caravan self-sufficient.
Integrated sensors monitor water level, battery charge and control temperature;
It was created by Ukrainian-German company Lemki Robotix.
OPS: The 3D printed Tiny Camper made from 7,000 recycled plastic bottles.
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS) -
DUKAS_181733699_FER
3D printed mobile home made from recycled plastic bottles.
Ferrari Press Agency
Tiny Camper 1
Ref 16580
26/02/2025
See Ferrari pictures
Picture MUST credit: Lemki Robotics
A mobile home, 3D printed from 7,000 recycled plastic bottles, has hit the road.
Called Tiny Camper, the bijou teardrop-shaped creation is eight metres long and just over three metres tall and wide.
The recycled polypropylene from the bottles is reinforced with fibreglass.
The 9 mm thick walls are able to maintain strength yet the shell weighs only 250 kg.
The interior has integrated sleeping area , a kitchenette and storage plus a TV screen.
There is even ambient lighting which is controlled remotely from a handset.
Tiny Camper also comes with integrated batteries that can be connected to solar panels to make the caravan self-sufficient.
Integrated sensors monitor water level, battery charge and control temperature;
It was created by Ukrainian-German company Lemki Robotix.
OPS: The 3D printed Tiny Camper made from 7,000 recycled plastic bottles.
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS) -
DUKAS_181733693_FER
3D printed mobile home made from recycled plastic bottles.
Ferrari Press Agency
Tiny Camper 1
Ref 16580
26/02/2025
See Ferrari pictures
Picture MUST credit: Lemki Robotics
A mobile home, 3D printed from 7,000 recycled plastic bottles, has hit the road.
Called Tiny Camper, the bijou teardrop-shaped creation is eight metres long and just over three metres tall and wide.
The recycled polypropylene from the bottles is reinforced with fibreglass.
The 9 mm thick walls are able to maintain strength yet the shell weighs only 250 kg.
The interior has integrated sleeping area , a kitchenette and storage plus a TV screen.
There is even ambient lighting which is controlled remotely from a handset.
Tiny Camper also comes with integrated batteries that can be connected to solar panels to make the caravan self-sufficient.
Integrated sensors monitor water level, battery charge and control temperature;
It was created by Ukrainian-German company Lemki Robotix.
OPS: The 3D printed Tiny Camper made from 7,000 recycled plastic bottles.
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS) -
DUKAS_181733682_FER
3D printed mobile home made from recycled plastic bottles.
Ferrari Press Agency
Tiny Camper 1
Ref 16580
26/02/2025
See Ferrari pictures
Picture MUST credit: Lemki Robotics
A mobile home, 3D printed from 7,000 recycled plastic bottles, has hit the road.
Called Tiny Camper, the bijou teardrop-shaped creation is eight metres long and just over three metres tall and wide.
The recycled polypropylene from the bottles is reinforced with fibreglass.
The 9 mm thick walls are able to maintain strength yet the shell weighs only 250 kg.
The interior has integrated sleeping area , a kitchenette and storage plus a TV screen.
There is even ambient lighting which is controlled remotely from a handset.
Tiny Camper also comes with integrated batteries that can be connected to solar panels to make the caravan self-sufficient.
Integrated sensors monitor water level, battery charge and control temperature;
It was created by Ukrainian-German company Lemki Robotix.
OPS: The 3D printed Tiny Camper made from 7,000 recycled plastic bottles.
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS) -
DUKAS_181733676_FER
3D printed mobile home made from recycled plastic bottles.
Ferrari Press Agency
Tiny Camper 1
Ref 16580
26/02/2025
See Ferrari pictures
Picture MUST credit: Lemki Robotics
A mobile home, 3D printed from 7,000 recycled plastic bottles, has hit the road.
Called Tiny Camper, the bijou teardrop-shaped creation is eight metres long and just over three metres tall and wide.
The recycled polypropylene from the bottles is reinforced with fibreglass.
The 9 mm thick walls are able to maintain strength yet the shell weighs only 250 kg.
The interior has integrated sleeping area , a kitchenette and storage plus a TV screen.
There is even ambient lighting which is controlled remotely from a handset.
Tiny Camper also comes with integrated batteries that can be connected to solar panels to make the caravan self-sufficient.
Integrated sensors monitor water level, battery charge and control temperature;
It was created by Ukrainian-German company Lemki Robotix.
OPS: The 3D printed Tiny Camper made from 7,000 recycled plastic bottles.
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS) -
DUKAS_181733670_FER
3D printed mobile home made from recycled plastic bottles.
Ferrari Press Agency
Tiny Camper 1
Ref 16580
26/02/2025
See Ferrari pictures
Picture MUST credit: Lemki Robotics
A mobile home, 3D printed from 7,000 recycled plastic bottles, has hit the road.
Called Tiny Camper, the bijou teardrop-shaped creation is eight metres long and just over three metres tall and wide.
The recycled polypropylene from the bottles is reinforced with fibreglass.
The 9 mm thick walls are able to maintain strength yet the shell weighs only 250 kg.
The interior has integrated sleeping area , a kitchenette and storage plus a TV screen.
There is even ambient lighting which is controlled remotely from a handset.
Tiny Camper also comes with integrated batteries that can be connected to solar panels to make the caravan self-sufficient.
Integrated sensors monitor water level, battery charge and control temperature;
It was created by Ukrainian-German company Lemki Robotix.
OPS: The 3D printed Tiny Camper made from 7,000 recycled plastic bottles.
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS) -
