Ihre Suche nach:
585 Ergebnis(se) in 0.16 s
-
DUKAS_183849799_NUR
Hightened Security At Vatican As Funeral Nears
A security guard gestures near the Vatican, following the Pope's death, in Rome on April 23, 2025. (Photo by Jaap Arriens/NurPhoto) -
DUKAS_182558650_FER
World's smallest MCU
Ferrari Press Agency
MCU 1
Ref 16634
16/03/2025
See Ferrari text
Pictures must credit: Texas Instruments
The world’s smallest micro-controller, effectively a computer on a chip, has been unveiled and it’s about the size of a black pepper flake.
Known as an MCU, they are used in things like medical wearables and consumer electronics such as earbuds, without compromising performance.
The new wafer-thin chip, called the MSPM0C1104 measures just 1.38mm2 and has been created by US electronics giant Texas Instruments.
It is 38% smaller than existing alternatives.
The firm said consumers are continuously demanding that everyday electronic items, such as electric toothbrushes and stylus pens, offer more features in a smaller footprint at a lower cost.
A spokesperson explained: “ To innovate within these shrinking products, engineers are increasingly seeking compact, integrated components that enable them to add functionality while preserving board space.”
The MCU features 16KB of memory; a 12-bit analog-to-digital converter with three channels; six general-purpose input/output pins; and compatibility with standard communication interfaces.
Integrating accurate, high-speed analog components into the world's smallest MCU gives engineers the flexibility to maintain the computing performance in systems without increasing board size.
Vice president Vinay Agarwal said the world's smallest MCU, provides unlimited possibilities for smarter, more connected experiences for everyone in day-to-day life
It is also cost effective starting at just $0.16 USD for orders of 1,000 units.
OPS: The world’s smallest MCU, the MSPM0C1104, by Texas Instruments, on a finger tip
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS) -
DUK10162675_269
PEOPLE - Oscars 2025: Vanity Fair Party
Mandatory Credit: Photo by Fernando Allende/Broadimage/Shutterstock (15176380ag)
Lizzo
2025 Vanity Fair Oscar Party, Los Angeles, California, United States - 03 Mar 2025
(c) Dukas -
DUK10162675_263
PEOPLE - Oscars 2025: Vanity Fair Party
Mandatory Credit: Photo by Fernando Allende/Broadimage/Shutterstock (15176380am)
Mikey Madison
2025 Vanity Fair Oscar Party, Los Angeles, California, United States - 03 Mar 2025
(c) Dukas -
DUK10162675_212
PEOPLE - Oscars 2025: Vanity Fair Party
Mandatory Credit: Photo by Fernando Allende/Broadimage/Shutterstock (15176380n)
Vin Diesel
2025 Vanity Fair Oscar Party, Los Angeles, California, United States - 03 Mar 2025
(c) Dukas -
DUK10162675_160
PEOPLE - Oscars 2025: Vanity Fair Party
Mandatory Credit: Photo by Fernando Allende/Broadimage/Shutterstock (15176380aw)
Giancarlo Esposito
2025 Vanity Fair Oscar Party, Los Angeles, California, United States - 03 Mar 2025
(c) Dukas -
DUK10162675_156
PEOPLE - Oscars 2025: Vanity Fair Party
Mandatory Credit: Photo by Fernando Allende/Broadimage/Shutterstock (15176380ba)
Giancarlo Esposito
2025 Vanity Fair Oscar Party, Los Angeles, California, United States - 03 Mar 2025
(c) Dukas -
DUK10162675_153
PEOPLE - Oscars 2025: Vanity Fair Party
Mandatory Credit: Photo by Fernando Allende/Broadimage/Shutterstock (15176380bd)
Mikey Madison
2025 Vanity Fair Oscar Party, Los Angeles, California, United States - 03 Mar 2025
(c) Dukas -
DUK10162675_662
PEOPLE - Oscars 2025: Vanity Fair Party
Mandatory Credit: Photo by Fernando Allende/Broadimage/Shutterstock (15175881ai)
Mick Jagger
2025 Vanity Fair Oscar Party, Los Angeles, California, United States - 02 Mar 2025
(c) Dukas -
DUK10162675_627
PEOPLE - Oscars 2025: Vanity Fair Party
Mandatory Credit: Photo by Fernando Allende/Broadimage/Shutterstock (15175881br)
Sarah Paulson
2025 Vanity Fair Oscar Party, Los Angeles, California, United States - 02 Mar 2025
(c) Dukas -
DUK10162675_429
PEOPLE - Oscars 2025: Vanity Fair Party
Mandatory Credit: Photo by Fernando Allende/Broadimage/Shutterstock (15175881jh)
Selena Gomez
2025 Vanity Fair Oscar Party, Los Angeles, California, United States - 02 Mar 2025
(c) Dukas -
DUK10162675_247
PEOPLE - Oscars 2025: Vanity Fair Party
Mandatory Credit: Photo by Fernando Allende/Broadimage/Shutterstock (15175881e)
Nikki Glaser
2025 Vanity Fair Oscar Party, Los Angeles, California, United States - 02 Mar 2025
(c) Dukas -
DUK10162675_180
PEOPLE - Oscars 2025: Vanity Fair Party
Mandatory Credit: Photo by Fernando Allende/Broadimage/Shutterstock (15175881py)
Rahul Kohli,Lindsay Lohan
2025 Vanity Fair Oscar Party, Los Angeles, California, United States - 02 Mar 2025
(c) Dukas -
DUK10162675_176
PEOPLE - Oscars 2025: Vanity Fair Party
Mandatory Credit: Photo by Fernando Allende/Broadimage/Shutterstock (15175881qc)
Mick Jagger
2025 Vanity Fair Oscar Party, Los Angeles, California, United States - 02 Mar 2025
(c) Dukas -
DUK10162675_089
PEOPLE - Oscars 2025: Vanity Fair Party
Mandatory Credit: Photo by Fernando Allende/Broadimage/Shutterstock (15175881su)
Christina Ricci
2025 Vanity Fair Oscar Party, Los Angeles, California, United States - 02 Mar 2025
(c) Dukas -
DUK10162675_085
PEOPLE - Oscars 2025: Vanity Fair Party
Mandatory Credit: Photo by Fernando Allende/Broadimage/Shutterstock (15175881sw)
Christina Ricci
2025 Vanity Fair Oscar Party, Los Angeles, California, United States - 02 Mar 2025
(c) Dukas -
DUKAS_161682515_FER
Free to 3D print prosthesis for finger amputees
Ferrari Press Agency
Hand 1
Ref 15197
17/10/2023
See Ferrari text
pictures must credit: University of Houston
A groundbreaking, easy-to-use 3D printable finger prosthesis could offer amputees a low-cost solution to restore finger functionality.
While standard prostheses can cost thousands, inventor David Edquilang aims to make his design open access on the internet, instead of selling it.
The prosthesis , called Lunet, was inspired by his desire to help a woman he had heard about who had some fingers amputated due to frostbite.
He was already working working on an upper limb prosthesis as an undergraduate at the University of Houston, Texas, in the USA.
Edquilang created prosthetic fingers that returned mobility to the patient, allowing her to pick up objects again.
It was created with help from his design and architecture school professor Jeff Feng.
It fits over the back of the hand and slips over the stubs of any missing fingers.
When closing the hand the prosthetic fingers close around any object that needs picking up.
It can be printed to match the required number of prosthetic fingers required.
OPS: An early prototype of the Lunet
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS) -
DUKAS_161682512_FER
Free to 3D print prosthesis for finger amputees
Ferrari Press Agency
Hand 1
Ref 15197
17/10/2023
See Ferrari text
pictures must credit: University of Houston
A groundbreaking, easy-to-use 3D printable finger prosthesis could offer amputees a low-cost solution to restore finger functionality.
While standard prostheses can cost thousands, inventor David Edquilang aims to make his design open access on the internet, instead of selling it.
The prosthesis , called Lunet, was inspired by his desire to help a woman he had heard about who had some fingers amputated due to frostbite.
He was already working working on an upper limb prosthesis as an undergraduate at the University of Houston, Texas, in the USA.
Edquilang created prosthetic fingers that returned mobility to the patient, allowing her to pick up objects again.
It was created with help from his design and architecture school professor Jeff Feng.
It fits over the back of the hand and slips over the stubs of any missing fingers.
When closing the hand the prosthetic fingers close around any object that needs picking up.
It can be printed to match the required number of prosthetic fingers required.
OPS: The Lunet.It can be configured to match the number of missing fingers
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS) -
DUKAS_161682510_FER
Free to 3D print prosthesis for finger amputees
Ferrari Press Agency
Hand 1
Ref 15197
17/10/2023
See Ferrari text
pictures must credit: University of Houston
A groundbreaking, easy-to-use 3D printable finger prosthesis could offer amputees a low-cost solution to restore finger functionality.
While standard prostheses can cost thousands, inventor David Edquilang aims to make his design open access on the internet, instead of selling it.
The prosthesis , called Lunet, was inspired by his desire to help a woman he had heard about who had some fingers amputated due to frostbite.
He was already working working on an upper limb prosthesis as an undergraduate at the University of Houston, Texas, in the USA.
Edquilang created prosthetic fingers that returned mobility to the patient, allowing her to pick up objects again.
It was created with help from his design and architecture school professor Jeff Feng.
It fits over the back of the hand and slips over the stubs of any missing fingers.
When closing the hand the prosthetic fingers close around any object that needs picking up.
It can be printed to match the required number of prosthetic fingers required.
OPS: The Lunet.It can be configured to match the number of missing fingers
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS) -
DUKAS_161682508_FER
Free to 3D print prosthesis for finger amputees
Ferrari Press Agency
Hand 1
Ref 15197
17/10/2023
See Ferrari text
pictures must credit: University of Houston
A groundbreaking, easy-to-use 3D printable finger prosthesis could offer amputees a low-cost solution to restore finger functionality.
While standard prostheses can cost thousands, inventor David Edquilang aims to make his design open access on the internet, instead of selling it.
The prosthesis , called Lunet, was inspired by his desire to help a woman he had heard about who had some fingers amputated due to frostbite.
He was already working working on an upper limb prosthesis as an undergraduate at the University of Houston, Texas, in the USA.
Edquilang created prosthetic fingers that returned mobility to the patient, allowing her to pick up objects again.
It was created with help from his design and architecture school professor Jeff Feng.
It fits over the back of the hand and slips over the stubs of any missing fingers.
When closing the hand the prosthetic fingers close around any object that needs picking up.
It can be printed to match the required number of prosthetic fingers required.
OPS: The Lunet.It can be configured to match the number of missing fingers
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS) -
DUKAS_161682506_FER
Free to 3D print prosthesis for finger amputees
Ferrari Press Agency
Hand 1
Ref 15197
17/10/2023
See Ferrari text
pictures must credit: University of Houston
A groundbreaking, easy-to-use 3D printable finger prosthesis could offer amputees a low-cost solution to restore finger functionality.
While standard prostheses can cost thousands, inventor David Edquilang aims to make his design open access on the internet, instead of selling it.
The prosthesis , called Lunet, was inspired by his desire to help a woman he had heard about who had some fingers amputated due to frostbite.
He was already working working on an upper limb prosthesis as an undergraduate at the University of Houston, Texas, in the USA.
Edquilang created prosthetic fingers that returned mobility to the patient, allowing her to pick up objects again.
It was created with help from his design and architecture school professor Jeff Feng.
It fits over the back of the hand and slips over the stubs of any missing fingers.
When closing the hand the prosthetic fingers close around any object that needs picking up.
It can be printed to match the required number of prosthetic fingers required.
OPS: The Lunet.It can be configured to match the number of missing fingers
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS) -
DUKAS_161682504_FER
Free to 3D print prosthesis for finger amputees
Ferrari Press Agency
Hand 1
Ref 15197
17/10/2023
See Ferrari text
pictures must credit: University of Houston
A groundbreaking, easy-to-use 3D printable finger prosthesis could offer amputees a low-cost solution to restore finger functionality.
While standard prostheses can cost thousands, inventor David Edquilang aims to make his design open access on the internet, instead of selling it.
The prosthesis , called Lunet, was inspired by his desire to help a woman he had heard about who had some fingers amputated due to frostbite.
He was already working working on an upper limb prosthesis as an undergraduate at the University of Houston, Texas, in the USA.
Edquilang created prosthetic fingers that returned mobility to the patient, allowing her to pick up objects again.
It was created with help from his design and architecture school professor Jeff Feng.
It fits over the back of the hand and slips over the stubs of any missing fingers.
When closing the hand the prosthetic fingers close around any object that needs picking up.
It can be printed to match the required number of prosthetic fingers required.
OPS: The Lunet being 3D printed.It can be configured to match the number of missing fingers
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS) -
DUKAS_161682502_FER
Free to 3D print prosthesis for finger amputees
Ferrari Press Agency
Hand 1
Ref 15197
17/10/2023
See Ferrari text
pictures must credit: University of Houston
A groundbreaking, easy-to-use 3D printable finger prosthesis could offer amputees a low-cost solution to restore finger functionality.
While standard prostheses can cost thousands, inventor David Edquilang aims to make his design open access on the internet, instead of selling it.
The prosthesis , called Lunet, was inspired by his desire to help a woman he had heard about who had some fingers amputated due to frostbite.
He was already working working on an upper limb prosthesis as an undergraduate at the University of Houston, Texas, in the USA.
Edquilang created prosthetic fingers that returned mobility to the patient, allowing her to pick up objects again.
It was created with help from his design and architecture school professor Jeff Feng.
It fits over the back of the hand and slips over the stubs of any missing fingers.
When closing the hand the prosthetic fingers close around any object that needs picking up.
It can be printed to match the required number of prosthetic fingers required.
OPS: The Lunet.It can be configured to match the number of missing fingers
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS) -
DUKAS_161682499_FER
Free to 3D print prosthesis for finger amputees
Ferrari Press Agency
Hand 1
Ref 15197
17/10/2023
See Ferrari text
pictures must credit: University of Houston
A groundbreaking, easy-to-use 3D printable finger prosthesis could offer amputees a low-cost solution to restore finger functionality.
While standard prostheses can cost thousands, inventor David Edquilang aims to make his design open access on the internet, instead of selling it.
The prosthesis , called Lunet, was inspired by his desire to help a woman he had heard about who had some fingers amputated due to frostbite.
He was already working working on an upper limb prosthesis as an undergraduate at the University of Houston, Texas, in the USA.
Edquilang created prosthetic fingers that returned mobility to the patient, allowing her to pick up objects again.
It was created with help from his design and architecture school professor Jeff Feng.
It fits over the back of the hand and slips over the stubs of any missing fingers.
When closing the hand the prosthetic fingers close around any object that needs picking up.
It can be printed to match the required number of prosthetic fingers required.
OPS: The Lunet designer David Edquilang
Picture supplied by Ferrari
(FOTO: DUKAS/FERRARI PRESS) -
DUKAS_161682497_FER
Free to 3D print prosthesis for finger amputees
Ferrari Press Agency
Hand 1
Ref 15197
17/10/2023
See Ferrari text
pictures must credit: University of Houston
A groundbreaking, easy-to-use 3D printable finger prosthesis could offer amputees a low-cost solution to restore finger functionality.
While standard prostheses can cost thousands, inventor David Edquilang aims to make his design open access on the internet, instead of selling it.
The prosthesis , called Lunet, was inspired by his desire to help a woman he had heard about who had some fingers amputated due to frostbite.
He was already working working on an upper limb prosthesis as an undergraduate at the University of Houston, Texas, in the USA.
Edquilang created prosthetic fingers that returned mobility to the patient, allowing her to pick up objects again.
It was created with help from his design and architecture school professor Jeff Feng.
It fits over the back of the hand and slips over the stubs of any missing fingers.
When closing the hand the prosthetic fingers close around any object that needs picking up.
It can be printed to match the required number of prosthetic fingers required.
OPS: The Lunet.It can be configured to match the number of missing fingers
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS) -
DUKAS_161682493_FER
Free to 3D print prosthesis for finger amputees
Ferrari Press Agency
Hand 1
Ref 15197
17/10/2023
See Ferrari text
pictures must credit: University of Houston
A groundbreaking, easy-to-use 3D printable finger prosthesis could offer amputees a low-cost solution to restore finger functionality.
While standard prostheses can cost thousands, inventor David Edquilang aims to make his design open access on the internet, instead of selling it.
The prosthesis , called Lunet, was inspired by his desire to help a woman he had heard about who had some fingers amputated due to frostbite.
He was already working working on an upper limb prosthesis as an undergraduate at the University of Houston, Texas, in the USA.
Edquilang created prosthetic fingers that returned mobility to the patient, allowing her to pick up objects again.
It was created with help from his design and architecture school professor Jeff Feng.
It fits over the back of the hand and slips over the stubs of any missing fingers.
When closing the hand the prosthetic fingers close around any object that needs picking up.
It can be printed to match the required number of prosthetic fingers required.
OPS: A finger amputation patient using the Lunet
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS) -
DUK10147740_012
TENNIS - Daniil Medwedew gewinnt gegen Tsitsipas im Halbfinal der AO 2022
Mandatory Credit: Photo by James Gourley/Shutterstock (12775245fn)
Daniil Medvedev points an accusing finger to the umpire after he lost the second set
Australian Open, Day Twelve, Tennis, Melbourne Park, Melbourne, Australia - 28 Jan 2022
(c) Dukas -
DUK10146652_003
FEATURE - Winzige Kamera von der Größe eines Salzkorns liefert gestochen scharfe Bilder
Ferrari Press Agency
Camera 1
Ref 13526
30/11/2021
See Ferrari text
Pictures must credit: Princeton University
An ultra-compact camera the size of a grain of salt has been developed by scientists,It can produce crisp, full-colour images on par with a conventional compound camera lens 500,000 times larger in volume.Micro-sized cameras have great potential to spot problems in the human body and enable sensing for super-small robots.Past approaches captured fuzzy, distorted images with limited fields of view.But US researchers at Princeton University and the University of Washington have overcome these obstacles.The system could enable minimally invasive endoscopy with medical robots to diagnose and treat diseases, and improve imaging for other robots with size and weight constraints. Arrays of thousands of such cameras could be used for full-scene sensing, turning surfaces into cameras.A traditional camera uses a series of curved glass or plastic lenses to bend light rays into focus.The new optical system for the tiny camera relies on a technology called a metasurface, which can be produced much like a computer chip.
OPS:The ultracompact camera the size of a coarse grain of salt. The system relies on a technology called a metasurface, which is studded with 1.6 million cylindrical posts and can be produced much like a computer chip.
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS)
(c) Dukas -
DUK10146652_002
FEATURE - Winzige Kamera von der Größe eines Salzkorns liefert gestochen scharfe Bilder
Ferrari Press Agency
Camera 1
Ref 13526
30/11/2021
See Ferrari text
Pictures must credit: Princeton University
An ultra-compact camera the size of a grain of salt has been developed by scientists,It can produce crisp, full-colour images on par with a conventional compound camera lens 500,000 times larger in volume.Micro-sized cameras have great potential to spot problems in the human body and enable sensing for super-small robots.Past approaches captured fuzzy, distorted images with limited fields of view.But US researchers at Princeton University and the University of Washington have overcome these obstacles.The system could enable minimally invasive endoscopy with medical robots to diagnose and treat diseases, and improve imaging for other robots with size and weight constraints. Arrays of thousands of such cameras could be used for full-scene sensing, turning surfaces into cameras.A traditional camera uses a series of curved glass or plastic lenses to bend light rays into focus.The new optical system for the tiny camera relies on a technology called a metasurface, which can be produced much like a computer chip.
OPS:Previous micro-sized cameras (left) captured fuzzy, distorted images with limited fields of view. The new system called neural nano-optics (right) can produce crisp, full-color images on par with a conventional compound camera lens.
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS)
(c) Dukas -
DUK10146652_001
FEATURE - Winzige Kamera von der Größe eines Salzkorns liefert gestochen scharfe Bilder
Ferrari Press Agency
Camera 1
Ref 13526
30/11/2021
See Ferrari text
Pictures must credit: Princeton University
An ultra-compact camera the size of a grain of salt has been developed by scientists,It can produce crisp, full-colour images on par with a conventional compound camera lens 500,000 times larger in volume.Micro-sized cameras have great potential to spot problems in the human body and enable sensing for super-small robots.Past approaches captured fuzzy, distorted images with limited fields of view.But US researchers at Princeton University and the University of Washington have overcome these obstacles.The system could enable minimally invasive endoscopy with medical robots to diagnose and treat diseases, and improve imaging for other robots with size and weight constraints. Arrays of thousands of such cameras could be used for full-scene sensing, turning surfaces into cameras.A traditional camera uses a series of curved glass or plastic lenses to bend light rays into focus.The new optical system for the tiny camera relies on a technology called a metasurface, which can be produced much like a computer chip.
OPS:The ultracompact camera the size of a coarse grain of salt. The system relies on a technology called a metasurface, which is studded with 1.6 million cylindrical posts and can be produced much like a computer chip.
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS)
(c) Dukas -
DUK10143192_006
TENNIS - Roland Garros: Novak Djokovic erhält eine Behandlung für seinen Finger
Mandatory Credit: Photo by Javier Garcia/BPI/Shutterstock (12019129gw)
Novak Djokovic receives treatment for his finger, injured while falling to the floor to take a shot
French Open Tennis, Day Nine, Roland Garros, Paris, France - 07 Jun 2021
(c) Dukas -
DUK10143192_005
TENNIS - Roland Garros: Novak Djokovic erhält eine Behandlung für seinen Finger
Mandatory Credit: Photo by Javier Garcia/BPI/Shutterstock (12019129gu)
Novak Djokovic receives treatment for his finger, injured while falling to the floor to take a shot
French Open Tennis, Day Nine, Roland Garros, Paris, France - 07 Jun 2021
(c) Dukas -
DUK10143192_004
TENNIS - Roland Garros: Novak Djokovic erhält eine Behandlung für seinen Finger
Mandatory Credit: Photo by Javier Garcia/BPI/Shutterstock (12019129gv)
Novak Djokovic receives treatment for his finger, injured while falling to the floor to take a shot
French Open Tennis, Day Nine, Roland Garros, Paris, France - 07 Jun 2021
(c) Dukas -
DUK10143192_003
TENNIS - Roland Garros: Novak Djokovic erhält eine Behandlung für seinen Finger
Mandatory Credit: Photo by Javier Garcia/BPI/Shutterstock (12019129gr)
Novak Djokovic injures his finger as he falls to the floor while taking a shot
French Open Tennis, Day Nine, Roland Garros, Paris, France - 07 Jun 2021
(c) Dukas -
DUK10143192_002
TENNIS - Roland Garros: Novak Djokovic erhält eine Behandlung für seinen Finger
Mandatory Credit: Photo by Javier Garcia/BPI/Shutterstock (12019129gt)
Novak Djokovic receives treatment for his finger, injured while falling to the floor to take a shot
French Open Tennis, Day Nine, Roland Garros, Paris, France - 07 Jun 2021
(c) Dukas -
DUK10143192_001
TENNIS - Roland Garros: Novak Djokovic erhält eine Behandlung für seinen Finger
Mandatory Credit: Photo by Javier Garcia/BPI/Shutterstock (12019129gs)
Novak Djokovic injures his finger as he falls to the floor while taking a shot
French Open Tennis, Day Nine, Roland Garros, Paris, France - 07 Jun 2021
(c) Dukas -
DUK10143091_008
NEWS - Kanzlerin Merkel nach Regionalkonferenz der Regierungschefs der ostdeutschen Länder
Gemeinsame Presseunterrichtung von Kanzlerin Merkel mit Ministerpräsident Woidke im Anschluss an die 48. Regionalkonferenz der Regierungschefs der ostdeutschen Länder im Berliner Kanzleramt
/ 020621
*** A detail shows hands of German Chancellor Angela Merkel during a press conference with Premier of Brandenburg Woidke after the 48th regional conference of the heads of government of the East German states (MPK-Ost)' in Berlin, Germany, 02 June 2021. *** *** Local Caption *** 34932358
(c) Dukas -
DUK10137921_008
NEWS - Thailand: Proteste für Monarchie-Reformen in Bangkok
November 8, 2020, Bangkok, Thailand: A protester making the three finger salute, standing next to a banner during the demonstration..Pro-democracy protester marched from democracy monument to the grand palace to deliver letters from the people to the monarchy demanding the monarchy to be under the constitution. Police fired water cannons at protesters including the press without warning. (Credit Image: © Jittima Lukboon/SOPA Images via ZUMA Wire (FOTO: DUKAS/ZUMA)
(c) Dukas -
DUK10137921_007
NEWS - Thailand: Proteste für Monarchie-Reformen in Bangkok
November 8, 2020, Bangkok, Thailand: Protesters making the three finger salute before the police during the demonstration..Pro-democracy protester marched from democracy monument to the grand palace to deliver letters from the people to the monarchy demanding the monarchy to be under the constitution. Police fired water cannons at protesters including the press without warning. (Credit Image: © Jittima Lukboon/SOPA Images via ZUMA Wire (FOTO: DUKAS/ZUMA)
(c) Dukas -
DUKAS_116580473_REX
Mel Brooks and Carl Reiner, Hollywood, California, Usa - 08 Sep 2014
Mandatory Credit: Photo by Mel Melcon/Los Angeles Times/Shutterstock (10695753a)
Left to right-Writer, producer, Norman Lear, and comic legends Mel Brooks and Carl Reiner wave to the media after Brooks placed his hands and shoes in cement during a ceremony at the TLC Chinese Theatre IMAX in Hollywood on September 8, 2014. Brooks is displaying his left, hand, that includes a fake extra finger on it. (Mel Melcon/Los Angeles Times)
Mel Brooks and Carl Reiner, Hollywood, California, Usa - 08 Sep 2014 -
DUKAS_111276092_TOP
Colour Medium Format Transparency
A man holding the hand of a woman (FOTO:DUKAS/TOPFOTO)
DUKAS/TOPFOTO -
DUK10125029_004
FEATURE - Winzig: Der kleinste Bildsensor der Welt
Ferrari Press Agency
Ref 11051
Sensor 1
03/11/2019
See Ferrari text
Picture must credit: OmniVision
The world’s smallest image sensor that fits into a wafer-thin camera is able to take photos and videos inside the human body.It was created by US company OmniVision. The OV6948 unit has been declared the world's smallest commercially available image sensor by Guinness World Records. And the company has now squeezed it into a new camera module.The unit8 measures a mere 0.575 x 0.575 x 0.232 mm and has been installed in a complete camera module measuring 0.65 x 0.65 mm.It can be used in a 1-mm-diameter catheter or endoscope for 200 x 200 back-illuminated color images from inside a body for medical purposes.The chip also features 120-degree field of view, 3 to 30 mm focus range and the ability to capture video at up 30 frames per second.
OPS: The OVM6948 camera cube containing the OV6948 image sensor on a finger.
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS)
(c) Dukas -
DUK10125029_003
FEATURE - Winzig: Der kleinste Bildsensor der Welt
Ferrari Press Agency
Ref 11051
Sensor 1
03/11/2019
See Ferrari text
Picture must credit: OmniVision
The world’s smallest image sensor that fits into a wafer-thin camera is able to take photos and videos inside the human body.It was created by US company OmniVision. The OV6948 unit has been declared the world's smallest commercially available image sensor by Guinness World Records. And the company has now squeezed it into a new camera module.The unit8 measures a mere 0.575 x 0.575 x 0.232 mm and has been installed in a complete camera module measuring 0.65 x 0.65 mm.It can be used in a 1-mm-diameter catheter or endoscope for 200 x 200 back-illuminated color images from inside a body for medical purposes.The chip also features 120-degree field of view, 3 to 30 mm focus range and the ability to capture video at up 30 frames per second.
OPS: The OV6948 image sensor next to US cent
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS)
(c) Dukas -
DUK10125029_002
FEATURE - Winzig: Der kleinste Bildsensor der Welt
Ferrari Press Agency
Ref 11051
Sensor 1
03/11/2019
See Ferrari text
Picture must credit: OmniVision
The world’s smallest image sensor that fits into a wafer-thin camera is able to take photos and videos inside the human body.It was created by US company OmniVision. The OV6948 unit has been declared the world's smallest commercially available image sensor by Guinness World Records. And the company has now squeezed it into a new camera module.The unit8 measures a mere 0.575 x 0.575 x 0.232 mm and has been installed in a complete camera module measuring 0.65 x 0.65 mm.It can be used in a 1-mm-diameter catheter or endoscope for 200 x 200 back-illuminated color images from inside a body for medical purposes.The chip also features 120-degree field of view, 3 to 30 mm focus range and the ability to capture video at up 30 frames per second.
OPS: The OV6948 image sensor next to a pencil tip.
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS)
(c) Dukas -
DUK10125029_001
FEATURE - Winzig: Der kleinste Bildsensor der Welt
Ferrari Press Agency
Ref 11051
Sensor 1
03/11/2019
See Ferrari text
Picture must credit: OmniVision
The world’s smallest image sensor that fits into a wafer-thin camera is able to take photos and videos inside the human body.It was created by US company OmniVision. The OV6948 unit has been declared the world's smallest commercially available image sensor by Guinness World Records. And the company has now squeezed it into a new camera module.The unit8 measures a mere 0.575 x 0.575 x 0.232 mm and has been installed in a complete camera module measuring 0.65 x 0.65 mm.It can be used in a 1-mm-diameter catheter or endoscope for 200 x 200 back-illuminated color images from inside a body for medical purposes.The chip also features 120-degree field of view, 3 to 30 mm focus range and the ability to capture video at up 30 frames per second.
OPS: The OV6948 image sensor next to a ruler and paperclip
Picture supplied by Ferrari (FOTO: DUKAS/FERRARI PRESS)
(c) Dukas -
DUKAS_103835307_IIM
Theresa May resigns
The Prime Minister Theresa May has announced she will resign on June 7th 2019 Image ©Licensed to i-Images Picture Agency. 15/11/2018. London, United Kingdom. Brexit Deal Westminster.
Prime Minister Theresa May appears to give a hand signal as she departs from Number 10 Downing Street to deliver a statement on Brexit to Parliament.
Picture by Pete Maclaine / i-Images
(c) Dukas -
DUKAS_103835301_IIM
Theresa May resigns
The Prime Minister Theresa May has announced she will resign on June 7th 2019 Image ©Licensed to i-Images Picture Agency. 15/11/2018. London, United Kingdom. Brexit Deal Westminster.
Prime Minister Theresa May appears to give a hand signal as she departs from Number 10 Downing Street to deliver a statement on Brexit to Parliament.
Picture by Pete Maclaine / i-Images
(c) Dukas -
DUKAS_103834245_IIM
Theresa May resigns
The Prime Minister Theresa May has announced she will resign on June 7th 2019 Image ©Licensed to i-Images Picture Agency. 15/11/2018. London, United Kingdom. Brexit Deal Westminster.
Prime Minister Theresa May appears to give a hand signal as she departs from Number 10 Downing Street to deliver a statement on Brexit to Parliament.
Picture by Pete Maclaine / i-Images
(c) Dukas -
DUK10114990_011
EXKLUSIV - Hat "The Big Bang Theory"-Star Johnny Galecki geheiratet?
EXCLUSIVE. Coleman-Rayner
Los Angeles, CA, USA. February 13, 2019
Big Bang Theory star Johnny Galecki steps out with a ring on his wedding finger as he puffs on a cigar in Beverly Hills. The actor, 43, has been dating 21-year-old Alaina Meyer since late summer 2018.
CREDIT MUST READ: Coleman-Rayner
Tel US (001) 310-474-4343 – office
www.coleman-rayner.com
Print: Double Fee! Web: Triple Fee! -
DUK10114990_009
EXKLUSIV - Hat "The Big Bang Theory"-Star Johnny Galecki geheiratet?
EXCLUSIVE. Coleman-Rayner
Los Angeles, CA, USA. February 13, 2019
Big Bang Theory star Johnny Galecki steps out with a ring on his wedding finger as he puffs on a cigar in Beverly Hills. The actor, 43, has been dating 21-year-old Alaina Meyer since late summer 2018.
CREDIT MUST READ: Coleman-Rayner
Tel US (001) 310-474-4343 – office
www.coleman-rayner.com
Print: Double Fee! Web: Triple Fee! -
