Your search:
60 result(s) in 0.11 s
-
DUKAS_189381751_FER
Wind-blown rover for exploring Mars
Ferrari Press Agency
Mars 1
Ref 17163
28/09/2025
See Ferrari pictures
Picture MUST credit: Europlanet
A swarm of spherical robots, blown by the wind like tumbleweeds that could enable large-scale and low-cost exploration of Mars, have been developed by engineers.
The rovers are lightweight, five metre diameter machines designed to harness the power of Martian winds for mobility.
Groups could spread across the Red Planet could autonomously collect environmental data and give unprecedented atmospheric and surface information from different locations.
Recent experiments in a state-of-the-art wind tunnel and field tests in a quarry are said to have demonstrated the rovers could be set in motion and navigate over various terrains in conditions similar to those on Mars.
A final phase would involve collapsing the rovers into permanent measurement stations dotted around the surface providing long-term scientific measurements and potential infrastructure for future missions.
The robots have been developed by researchers known as Team Tumbleweed, an interdisciplinary group of young scientists from over 20 countries.
OPS: The tumbleweed scale model rover itsting at at quarry in Maastrict, Netherlands.
Picture supplied by Ferrari
(FOTO: DUKAS/FERRARI PRESS) -
DUKAS_189381750_FER
Wind-blown rover for exploring Mars
Ferrari Press Agency
Mars 1
Ref 17163
28/09/2025
See Ferrari pictures
Picture MUST credit: Europlanet
A swarm of spherical robots, blown by the wind like tumbleweeds that could enable large-scale and low-cost exploration of Mars, have been developed by engineers.
The rovers are lightweight, five metre diameter machines designed to harness the power of Martian winds for mobility.
Groups could spread across the Red Planet could autonomously collect environmental data and give unprecedented atmospheric and surface information from different locations.
Recent experiments in a state-of-the-art wind tunnel and field tests in a quarry are said to have demonstrated the rovers could be set in motion and navigate over various terrains in conditions similar to those on Mars.
A final phase would involve collapsing the rovers into permanent measurement stations dotted around the surface providing long-term scientific measurements and potential infrastructure for future missions.
The robots have been developed by researchers known as Team Tumbleweed, an interdisciplinary group of young scientists from over 20 countries.
OPS: The tumbleweed scale model rover itsting at at quarry in Maastrict, Netherlands.
Picture supplied by Ferrari
(FOTO: DUKAS/FERRARI PRESS) -
DUKAS_189381749_FER
Wind-blown rover for exploring Mars
Ferrari Press Agency
Mars 1
Ref 17163
28/09/2025
See Ferrari pictures
Picture MUST credit: Team Tumbleweed
A swarm of spherical robots, blown by the wind like tumbleweeds that could enable large-scale and low-cost exploration of Mars, have been developed by engineers.
The rovers are lightweight, five metre diameter machines designed to harness the power of Martian winds for mobility.
Groups could spread across the Red Planet could autonomously collect environmental data and give unprecedented atmospheric and surface information from different locations.
Recent experiments in a state-of-the-art wind tunnel and field tests in a quarry are said to have demonstrated the rovers could be set in motion and navigate over various terrains in conditions similar to those on Mars.
A final phase would involve collapsing the rovers into permanent measurement stations dotted around the surface providing long-term scientific measurements and potential infrastructure for future missions.
The robots have been developed by researchers known as Team Tumbleweed, an interdisciplinary group of young scientists from over 20 countries.
OPS: The tumbleweed rover in windtunnel testing at Aarhusarhus University in the Netherlands.
Picture supplied by Ferrari
(FOTO: DUKAS/FERRARI PRESS) -
DUKAS_189381748_FER
Wind-blown rover for exploring Mars
Ferrari Press Agency
Mars 1
Ref 17163
28/09/2025
See Ferrari pictures
Picture MUST credit: Team Tumbleweed
A swarm of spherical robots, blown by the wind like tumbleweeds that could enable large-scale and low-cost exploration of Mars, have been developed by engineers.
The rovers are lightweight, five metre diameter machines designed to harness the power of Martian winds for mobility.
Groups could spread across the Red Planet could autonomously collect environmental data and give unprecedented atmospheric and surface information from different locations.
Recent experiments in a state-of-the-art wind tunnel and field tests in a quarry are said to have demonstrated the rovers could be set in motion and navigate over various terrains in conditions similar to those on Mars.
A final phase would involve collapsing the rovers into permanent measurement stations dotted around the surface providing long-term scientific measurements and potential infrastructure for future missions.
The robots have been developed by researchers known as Team Tumbleweed, an interdisciplinary group of young scientists from over 20 countries.
OPS: The tumbleweed rover in windtunnel testing at Aarhusarhus University in the Netherlands.
Picture supplied by Ferrari
(FOTO: DUKAS/FERRARI PRESS) -
DUKAS_189381747_FER
Wind-blown rover for exploring Mars
Ferrari Press Agency
Mars 1
Ref 17163
28/09/2025
See Ferrari pictures
Picture MUST credit: Team Tumbleweed
A swarm of spherical robots, blown by the wind like tumbleweeds that could enable large-scale and low-cost exploration of Mars, have been developed by engineers.
The rovers are lightweight, five metre diameter machines designed to harness the power of Martian winds for mobility.
Groups could spread across the Red Planet could autonomously collect environmental data and give unprecedented atmospheric and surface information from different locations.
Recent experiments in a state-of-the-art wind tunnel and field tests in a quarry are said to have demonstrated the rovers could be set in motion and navigate over various terrains in conditions similar to those on Mars.
A final phase would involve collapsing the rovers into permanent measurement stations dotted around the surface providing long-term scientific measurements and potential infrastructure for future missions.
The robots have been developed by researchers known as Team Tumbleweed, an interdisciplinary group of young scientists from over 20 countries.
OPS: The tumbleweed rover in windtunnel testing at Aarhusarhus University in the Netherlands.
Picture supplied by Ferrari
(FOTO: DUKAS/FERRARI PRESS) -
DUKAS_189381746_FER
Wind-blown rover for exploring Mars
Ferrari Press Agency
Mars 1
Ref 17163
28/09/2025
See Ferrari pictures
Picture MUST credit: Team Tumbleweed
A swarm of spherical robots, blown by the wind like tumbleweeds that could enable large-scale and low-cost exploration of Mars, have been developed by engineers.
The rovers are lightweight, five metre diameter machines designed to harness the power of Martian winds for mobility.
Groups could spread across the Red Planet could autonomously collect environmental data and give unprecedented atmospheric and surface information from different locations.
Recent experiments in a state-of-the-art wind tunnel and field tests in a quarry are said to have demonstrated the rovers could be set in motion and navigate over various terrains in conditions similar to those on Mars.
A final phase would involve collapsing the rovers into permanent measurement stations dotted around the surface providing long-term scientific measurements and potential infrastructure for future missions.
The robots have been developed by researchers known as Team Tumbleweed, an interdisciplinary group of young scientists from over 20 countries.
OPS: Team Tumbleweed members with scaled tumbleweed prototype rovers
Picture supplied by Ferrari
(FOTO: DUKAS/FERRARI PRESS) -
DUK10147814_015
FEATURE - Ukrainische Architekten entwerfen Stadt für den Mars
Ukrainian architects Makhno Studio have designed a spectacular settlement for Mars utilising 3-D printing technology.
Named Plan C, it is a bagel-shaped settlement located on the inside of a crater - protecting it from Martian sandstorms, meteor showers and solar radiation.
The outer walls of Plan C would be made using giant 3D-printers due to the difficulty humans would face in constructing an environment without spacesuits, oxygen devices, and life support machines.
The interiors are designed to blur the aesthetics of Earth and Mars - featuring rock-like furnishings. A large plant-filled hall will stretch the length of the ring-shaped structure connect different parts of the settlement.
Phyto-lighting, ultraviolet and infrared lighting will promote plant growth and help them convert carbon dioxide and water into oxygen.
Additional spaces will include medical care zones, research centres that monitor planetary and atmospheric conditions, chemical and biological laboratories and administrative quarters,
The settlement will also be able to grow its own fruit and vegetables in spherical greenhouses fitted with Phyto-lamps were. These are designed to look like small planets.
The sleeping quarters are sparse - with only essential furniture for two people. But do agave a screen covering the ceiling to enable residents to pass the time by watching films. It will also feature a gym and fitness facility centre to prevent conditions like muscle atrophy, which can occur due to low gravity conditions. This will feature exercise bikes and narrow swimming pools that will help people adjust to the low-gravity conditions. To help residents keep calm, there will also be floating capsules for recovery and relaxation."
Where: Kiev, Ukraine
When: 24 Jan 2022
Credit: Makhno/Cover Images
**EDITORIAL USE ONLY. MATERIALS ONLY TO BE USED IN CONJUNCTION WITH EDITORIAL STORY. THE USE OF THESE MATERIALS FOR ADVERTISING, MARKETING OR ANY OTHER COMMERCIAL PURPOSE IS STRICTLY PROH
(c) Dukas -
DUK10147814_014
FEATURE - Ukrainische Architekten entwerfen Stadt für den Mars
Ukrainian architects Makhno Studio have designed a spectacular settlement for Mars utilising 3-D printing technology.
Named Plan C, it is a bagel-shaped settlement located on the inside of a crater - protecting it from Martian sandstorms, meteor showers and solar radiation.
The outer walls of Plan C would be made using giant 3D-printers due to the difficulty humans would face in constructing an environment without spacesuits, oxygen devices, and life support machines.
The interiors are designed to blur the aesthetics of Earth and Mars - featuring rock-like furnishings. A large plant-filled hall will stretch the length of the ring-shaped structure connect different parts of the settlement.
Phyto-lighting, ultraviolet and infrared lighting will promote plant growth and help them convert carbon dioxide and water into oxygen.
Additional spaces will include medical care zones, research centres that monitor planetary and atmospheric conditions, chemical and biological laboratories and administrative quarters,
The settlement will also be able to grow its own fruit and vegetables in spherical greenhouses fitted with Phyto-lamps were. These are designed to look like small planets.
The sleeping quarters are sparse - with only essential furniture for two people. But do agave a screen covering the ceiling to enable residents to pass the time by watching films. It will also feature a gym and fitness facility centre to prevent conditions like muscle atrophy, which can occur due to low gravity conditions. This will feature exercise bikes and narrow swimming pools that will help people adjust to the low-gravity conditions. To help residents keep calm, there will also be floating capsules for recovery and relaxation."
Where: Kiev, Ukraine
When: 24 Jan 2022
Credit: Makhno/Cover Images
**EDITORIAL USE ONLY. MATERIALS ONLY TO BE USED IN CONJUNCTION WITH EDITORIAL STORY. THE USE OF THESE MATERIALS FOR ADVERTISING, MARKETING OR ANY OTHER COMMERCIAL PURPOSE IS STRICTLY PROH
(c) Dukas -
DUK10147814_013
FEATURE - Ukrainische Architekten entwerfen Stadt für den Mars
Ukrainian architects Makhno Studio have designed a spectacular settlement for Mars utilising 3-D printing technology.
Named Plan C, it is a bagel-shaped settlement located on the inside of a crater - protecting it from Martian sandstorms, meteor showers and solar radiation.
The outer walls of Plan C would be made using giant 3D-printers due to the difficulty humans would face in constructing an environment without spacesuits, oxygen devices, and life support machines.
The interiors are designed to blur the aesthetics of Earth and Mars - featuring rock-like furnishings. A large plant-filled hall will stretch the length of the ring-shaped structure connect different parts of the settlement.
Phyto-lighting, ultraviolet and infrared lighting will promote plant growth and help them convert carbon dioxide and water into oxygen.
Additional spaces will include medical care zones, research centres that monitor planetary and atmospheric conditions, chemical and biological laboratories and administrative quarters,
The settlement will also be able to grow its own fruit and vegetables in spherical greenhouses fitted with Phyto-lamps were. These are designed to look like small planets.
The sleeping quarters are sparse - with only essential furniture for two people. But do agave a screen covering the ceiling to enable residents to pass the time by watching films. It will also feature a gym and fitness facility centre to prevent conditions like muscle atrophy, which can occur due to low gravity conditions. This will feature exercise bikes and narrow swimming pools that will help people adjust to the low-gravity conditions. To help residents keep calm, there will also be floating capsules for recovery and relaxation."
Where: Kiev, Ukraine
When: 24 Jan 2022
Credit: Makhno/Cover Images
**EDITORIAL USE ONLY. MATERIALS ONLY TO BE USED IN CONJUNCTION WITH EDITORIAL STORY. THE USE OF THESE MATERIALS FOR ADVERTISING, MARKETING OR ANY OTHER COMMERCIAL PURPOSE IS STRICTLY PROH
(c) Dukas -
DUK10147814_012
FEATURE - Ukrainische Architekten entwerfen Stadt für den Mars
Ukrainian architects Makhno Studio have designed a spectacular settlement for Mars utilising 3-D printing technology.
Named Plan C, it is a bagel-shaped settlement located on the inside of a crater - protecting it from Martian sandstorms, meteor showers and solar radiation.
The outer walls of Plan C would be made using giant 3D-printers due to the difficulty humans would face in constructing an environment without spacesuits, oxygen devices, and life support machines.
The interiors are designed to blur the aesthetics of Earth and Mars - featuring rock-like furnishings. A large plant-filled hall will stretch the length of the ring-shaped structure connect different parts of the settlement.
Phyto-lighting, ultraviolet and infrared lighting will promote plant growth and help them convert carbon dioxide and water into oxygen.
Additional spaces will include medical care zones, research centres that monitor planetary and atmospheric conditions, chemical and biological laboratories and administrative quarters,
The settlement will also be able to grow its own fruit and vegetables in spherical greenhouses fitted with Phyto-lamps were. These are designed to look like small planets.
The sleeping quarters are sparse - with only essential furniture for two people. But do agave a screen covering the ceiling to enable residents to pass the time by watching films. It will also feature a gym and fitness facility centre to prevent conditions like muscle atrophy, which can occur due to low gravity conditions. This will feature exercise bikes and narrow swimming pools that will help people adjust to the low-gravity conditions. To help residents keep calm, there will also be floating capsules for recovery and relaxation."
Where: Kiev, Ukraine
When: 24 Jan 2022
Credit: Makhno/Cover Images
**EDITORIAL USE ONLY. MATERIALS ONLY TO BE USED IN CONJUNCTION WITH EDITORIAL STORY. THE USE OF THESE MATERIALS FOR ADVERTISING, MARKETING OR ANY OTHER COMMERCIAL PURPOSE IS STRICTLY PROH
(c) Dukas -
DUK10147814_011
FEATURE - Ukrainische Architekten entwerfen Stadt für den Mars
Ukrainian architects Makhno Studio have designed a spectacular settlement for Mars utilising 3-D printing technology.
Named Plan C, it is a bagel-shaped settlement located on the inside of a crater - protecting it from Martian sandstorms, meteor showers and solar radiation.
The outer walls of Plan C would be made using giant 3D-printers due to the difficulty humans would face in constructing an environment without spacesuits, oxygen devices, and life support machines.
The interiors are designed to blur the aesthetics of Earth and Mars - featuring rock-like furnishings. A large plant-filled hall will stretch the length of the ring-shaped structure connect different parts of the settlement.
Phyto-lighting, ultraviolet and infrared lighting will promote plant growth and help them convert carbon dioxide and water into oxygen.
Additional spaces will include medical care zones, research centres that monitor planetary and atmospheric conditions, chemical and biological laboratories and administrative quarters,
The settlement will also be able to grow its own fruit and vegetables in spherical greenhouses fitted with Phyto-lamps were. These are designed to look like small planets.
The sleeping quarters are sparse - with only essential furniture for two people. But do agave a screen covering the ceiling to enable residents to pass the time by watching films. It will also feature a gym and fitness facility centre to prevent conditions like muscle atrophy, which can occur due to low gravity conditions. This will feature exercise bikes and narrow swimming pools that will help people adjust to the low-gravity conditions. To help residents keep calm, there will also be floating capsules for recovery and relaxation."
Where: Kiev, Ukraine
When: 24 Jan 2022
Credit: Makhno/Cover Images
**EDITORIAL USE ONLY. MATERIALS ONLY TO BE USED IN CONJUNCTION WITH EDITORIAL STORY. THE USE OF THESE MATERIALS FOR ADVERTISING, MARKETING OR ANY OTHER COMMERCIAL PURPOSE IS STRICTLY PROH
(c) Dukas -
DUK10147814_010
FEATURE - Ukrainische Architekten entwerfen Stadt für den Mars
Ukrainian architects Makhno Studio have designed a spectacular settlement for Mars utilising 3-D printing technology.
Named Plan C, it is a bagel-shaped settlement located on the inside of a crater - protecting it from Martian sandstorms, meteor showers and solar radiation.
The outer walls of Plan C would be made using giant 3D-printers due to the difficulty humans would face in constructing an environment without spacesuits, oxygen devices, and life support machines.
The interiors are designed to blur the aesthetics of Earth and Mars - featuring rock-like furnishings. A large plant-filled hall will stretch the length of the ring-shaped structure connect different parts of the settlement.
Phyto-lighting, ultraviolet and infrared lighting will promote plant growth and help them convert carbon dioxide and water into oxygen.
Additional spaces will include medical care zones, research centres that monitor planetary and atmospheric conditions, chemical and biological laboratories and administrative quarters,
The settlement will also be able to grow its own fruit and vegetables in spherical greenhouses fitted with Phyto-lamps were. These are designed to look like small planets.
The sleeping quarters are sparse - with only essential furniture for two people. But do agave a screen covering the ceiling to enable residents to pass the time by watching films. It will also feature a gym and fitness facility centre to prevent conditions like muscle atrophy, which can occur due to low gravity conditions. This will feature exercise bikes and narrow swimming pools that will help people adjust to the low-gravity conditions. To help residents keep calm, there will also be floating capsules for recovery and relaxation."
Where: Kiev, Ukraine
When: 24 Jan 2022
Credit: Makhno/Cover Images
**EDITORIAL USE ONLY. MATERIALS ONLY TO BE USED IN CONJUNCTION WITH EDITORIAL STORY. THE USE OF THESE MATERIALS FOR ADVERTISING, MARKETING OR ANY OTHER COMMERCIAL PURPOSE IS STRICTLY PROH
(c) Dukas -
DUK10147814_009
FEATURE - Ukrainische Architekten entwerfen Stadt für den Mars
Ukrainian architects Makhno Studio have designed a spectacular settlement for Mars utilising 3-D printing technology.
Named Plan C, it is a bagel-shaped settlement located on the inside of a crater - protecting it from Martian sandstorms, meteor showers and solar radiation.
The outer walls of Plan C would be made using giant 3D-printers due to the difficulty humans would face in constructing an environment without spacesuits, oxygen devices, and life support machines.
The interiors are designed to blur the aesthetics of Earth and Mars - featuring rock-like furnishings. A large plant-filled hall will stretch the length of the ring-shaped structure connect different parts of the settlement.
Phyto-lighting, ultraviolet and infrared lighting will promote plant growth and help them convert carbon dioxide and water into oxygen.
Additional spaces will include medical care zones, research centres that monitor planetary and atmospheric conditions, chemical and biological laboratories and administrative quarters,
The settlement will also be able to grow its own fruit and vegetables in spherical greenhouses fitted with Phyto-lamps were. These are designed to look like small planets.
The sleeping quarters are sparse - with only essential furniture for two people. But do agave a screen covering the ceiling to enable residents to pass the time by watching films. It will also feature a gym and fitness facility centre to prevent conditions like muscle atrophy, which can occur due to low gravity conditions. This will feature exercise bikes and narrow swimming pools that will help people adjust to the low-gravity conditions. To help residents keep calm, there will also be floating capsules for recovery and relaxation."
Where: Kiev, Ukraine
When: 24 Jan 2022
Credit: Makhno/Cover Images
**EDITORIAL USE ONLY. MATERIALS ONLY TO BE USED IN CONJUNCTION WITH EDITORIAL STORY. THE USE OF THESE MATERIALS FOR ADVERTISING, MARKETING OR ANY OTHER COMMERCIAL PURPOSE IS STRICTLY PROH
(c) Dukas -
DUK10147814_008
FEATURE - Ukrainische Architekten entwerfen Stadt für den Mars
Ukrainian architects Makhno Studio have designed a spectacular settlement for Mars utilising 3-D printing technology.
Named Plan C, it is a bagel-shaped settlement located on the inside of a crater - protecting it from Martian sandstorms, meteor showers and solar radiation.
The outer walls of Plan C would be made using giant 3D-printers due to the difficulty humans would face in constructing an environment without spacesuits, oxygen devices, and life support machines.
The interiors are designed to blur the aesthetics of Earth and Mars - featuring rock-like furnishings. A large plant-filled hall will stretch the length of the ring-shaped structure connect different parts of the settlement.
Phyto-lighting, ultraviolet and infrared lighting will promote plant growth and help them convert carbon dioxide and water into oxygen.
Additional spaces will include medical care zones, research centres that monitor planetary and atmospheric conditions, chemical and biological laboratories and administrative quarters,
The settlement will also be able to grow its own fruit and vegetables in spherical greenhouses fitted with Phyto-lamps were. These are designed to look like small planets.
The sleeping quarters are sparse - with only essential furniture for two people. But do agave a screen covering the ceiling to enable residents to pass the time by watching films. It will also feature a gym and fitness facility centre to prevent conditions like muscle atrophy, which can occur due to low gravity conditions. This will feature exercise bikes and narrow swimming pools that will help people adjust to the low-gravity conditions. To help residents keep calm, there will also be floating capsules for recovery and relaxation."
Where: Kiev, Ukraine
When: 24 Jan 2022
Credit: Makhno/Cover Images
**EDITORIAL USE ONLY. MATERIALS ONLY TO BE USED IN CONJUNCTION WITH EDITORIAL STORY. THE USE OF THESE MATERIALS FOR ADVERTISING, MARKETING OR ANY OTHER COMMERCIAL PURPOSE IS STRICTLY PROH
(c) Dukas -
DUK10147814_007
FEATURE - Ukrainische Architekten entwerfen Stadt für den Mars
Ukrainian architects Makhno Studio have designed a spectacular settlement for Mars utilising 3-D printing technology.
Named Plan C, it is a bagel-shaped settlement located on the inside of a crater - protecting it from Martian sandstorms, meteor showers and solar radiation.
The outer walls of Plan C would be made using giant 3D-printers due to the difficulty humans would face in constructing an environment without spacesuits, oxygen devices, and life support machines.
The interiors are designed to blur the aesthetics of Earth and Mars - featuring rock-like furnishings. A large plant-filled hall will stretch the length of the ring-shaped structure connect different parts of the settlement.
Phyto-lighting, ultraviolet and infrared lighting will promote plant growth and help them convert carbon dioxide and water into oxygen.
Additional spaces will include medical care zones, research centres that monitor planetary and atmospheric conditions, chemical and biological laboratories and administrative quarters,
The settlement will also be able to grow its own fruit and vegetables in spherical greenhouses fitted with Phyto-lamps were. These are designed to look like small planets.
The sleeping quarters are sparse - with only essential furniture for two people. But do agave a screen covering the ceiling to enable residents to pass the time by watching films. It will also feature a gym and fitness facility centre to prevent conditions like muscle atrophy, which can occur due to low gravity conditions. This will feature exercise bikes and narrow swimming pools that will help people adjust to the low-gravity conditions. To help residents keep calm, there will also be floating capsules for recovery and relaxation."
Where: Kiev, Ukraine
When: 24 Jan 2022
Credit: Makhno/Cover Images
**EDITORIAL USE ONLY. MATERIALS ONLY TO BE USED IN CONJUNCTION WITH EDITORIAL STORY. THE USE OF THESE MATERIALS FOR ADVERTISING, MARKETING OR ANY OTHER COMMERCIAL PURPOSE IS STRICTLY PROH
(c) Dukas -
DUK10147814_006
FEATURE - Ukrainische Architekten entwerfen Stadt für den Mars
Ukrainian architects Makhno Studio have designed a spectacular settlement for Mars utilising 3-D printing technology.
Named Plan C, it is a bagel-shaped settlement located on the inside of a crater - protecting it from Martian sandstorms, meteor showers and solar radiation.
The outer walls of Plan C would be made using giant 3D-printers due to the difficulty humans would face in constructing an environment without spacesuits, oxygen devices, and life support machines.
The interiors are designed to blur the aesthetics of Earth and Mars - featuring rock-like furnishings. A large plant-filled hall will stretch the length of the ring-shaped structure connect different parts of the settlement.
Phyto-lighting, ultraviolet and infrared lighting will promote plant growth and help them convert carbon dioxide and water into oxygen.
Additional spaces will include medical care zones, research centres that monitor planetary and atmospheric conditions, chemical and biological laboratories and administrative quarters,
The settlement will also be able to grow its own fruit and vegetables in spherical greenhouses fitted with Phyto-lamps were. These are designed to look like small planets.
The sleeping quarters are sparse - with only essential furniture for two people. But do agave a screen covering the ceiling to enable residents to pass the time by watching films. It will also feature a gym and fitness facility centre to prevent conditions like muscle atrophy, which can occur due to low gravity conditions. This will feature exercise bikes and narrow swimming pools that will help people adjust to the low-gravity conditions. To help residents keep calm, there will also be floating capsules for recovery and relaxation."
Where: Kiev, Ukraine
When: 24 Jan 2022
Credit: Makhno/Cover Images
**EDITORIAL USE ONLY. MATERIALS ONLY TO BE USED IN CONJUNCTION WITH EDITORIAL STORY. THE USE OF THESE MATERIALS FOR ADVERTISING, MARKETING OR ANY OTHER COMMERCIAL PURPOSE IS STRICTLY PROH
(c) Dukas -
DUK10147814_005
FEATURE - Ukrainische Architekten entwerfen Stadt für den Mars
Ukrainian architects Makhno Studio have designed a spectacular settlement for Mars utilising 3-D printing technology.
Named Plan C, it is a bagel-shaped settlement located on the inside of a crater - protecting it from Martian sandstorms, meteor showers and solar radiation.
The outer walls of Plan C would be made using giant 3D-printers due to the difficulty humans would face in constructing an environment without spacesuits, oxygen devices, and life support machines.
The interiors are designed to blur the aesthetics of Earth and Mars - featuring rock-like furnishings. A large plant-filled hall will stretch the length of the ring-shaped structure connect different parts of the settlement.
Phyto-lighting, ultraviolet and infrared lighting will promote plant growth and help them convert carbon dioxide and water into oxygen.
Additional spaces will include medical care zones, research centres that monitor planetary and atmospheric conditions, chemical and biological laboratories and administrative quarters,
The settlement will also be able to grow its own fruit and vegetables in spherical greenhouses fitted with Phyto-lamps were. These are designed to look like small planets.
The sleeping quarters are sparse - with only essential furniture for two people. But do agave a screen covering the ceiling to enable residents to pass the time by watching films. It will also feature a gym and fitness facility centre to prevent conditions like muscle atrophy, which can occur due to low gravity conditions. This will feature exercise bikes and narrow swimming pools that will help people adjust to the low-gravity conditions. To help residents keep calm, there will also be floating capsules for recovery and relaxation."
Where: Kiev, Ukraine
When: 24 Jan 2022
Credit: Makhno/Cover Images
**EDITORIAL USE ONLY. MATERIALS ONLY TO BE USED IN CONJUNCTION WITH EDITORIAL STORY. THE USE OF THESE MATERIALS FOR ADVERTISING, MARKETING OR ANY OTHER COMMERCIAL PURPOSE IS STRICTLY PROH
(c) Dukas -
DUK10147814_004
FEATURE - Ukrainische Architekten entwerfen Stadt für den Mars
Ukrainian architects Makhno Studio have designed a spectacular settlement for Mars utilising 3-D printing technology.
Named Plan C, it is a bagel-shaped settlement located on the inside of a crater - protecting it from Martian sandstorms, meteor showers and solar radiation.
The outer walls of Plan C would be made using giant 3D-printers due to the difficulty humans would face in constructing an environment without spacesuits, oxygen devices, and life support machines.
The interiors are designed to blur the aesthetics of Earth and Mars - featuring rock-like furnishings. A large plant-filled hall will stretch the length of the ring-shaped structure connect different parts of the settlement.
Phyto-lighting, ultraviolet and infrared lighting will promote plant growth and help them convert carbon dioxide and water into oxygen.
Additional spaces will include medical care zones, research centres that monitor planetary and atmospheric conditions, chemical and biological laboratories and administrative quarters,
The settlement will also be able to grow its own fruit and vegetables in spherical greenhouses fitted with Phyto-lamps were. These are designed to look like small planets.
The sleeping quarters are sparse - with only essential furniture for two people. But do agave a screen covering the ceiling to enable residents to pass the time by watching films. It will also feature a gym and fitness facility centre to prevent conditions like muscle atrophy, which can occur due to low gravity conditions. This will feature exercise bikes and narrow swimming pools that will help people adjust to the low-gravity conditions. To help residents keep calm, there will also be floating capsules for recovery and relaxation."
Where: Kiev, Ukraine
When: 24 Jan 2022
Credit: Makhno/Cover Images
**EDITORIAL USE ONLY. MATERIALS ONLY TO BE USED IN CONJUNCTION WITH EDITORIAL STORY. THE USE OF THESE MATERIALS FOR ADVERTISING, MARKETING OR ANY OTHER COMMERCIAL PURPOSE IS STRICTLY PROH
(c) Dukas -
DUK10147814_003
FEATURE - Ukrainische Architekten entwerfen Stadt für den Mars
Ukrainian architects Makhno Studio have designed a spectacular settlement for Mars utilising 3-D printing technology.
Named Plan C, it is a bagel-shaped settlement located on the inside of a crater - protecting it from Martian sandstorms, meteor showers and solar radiation.
The outer walls of Plan C would be made using giant 3D-printers due to the difficulty humans would face in constructing an environment without spacesuits, oxygen devices, and life support machines.
The interiors are designed to blur the aesthetics of Earth and Mars - featuring rock-like furnishings. A large plant-filled hall will stretch the length of the ring-shaped structure connect different parts of the settlement.
Phyto-lighting, ultraviolet and infrared lighting will promote plant growth and help them convert carbon dioxide and water into oxygen.
Additional spaces will include medical care zones, research centres that monitor planetary and atmospheric conditions, chemical and biological laboratories and administrative quarters,
The settlement will also be able to grow its own fruit and vegetables in spherical greenhouses fitted with Phyto-lamps were. These are designed to look like small planets.
The sleeping quarters are sparse - with only essential furniture for two people. But do agave a screen covering the ceiling to enable residents to pass the time by watching films. It will also feature a gym and fitness facility centre to prevent conditions like muscle atrophy, which can occur due to low gravity conditions. This will feature exercise bikes and narrow swimming pools that will help people adjust to the low-gravity conditions. To help residents keep calm, there will also be floating capsules for recovery and relaxation."
Where: Kiev, Ukraine
When: 24 Jan 2022
Credit: Makhno/Cover Images
**EDITORIAL USE ONLY. MATERIALS ONLY TO BE USED IN CONJUNCTION WITH EDITORIAL STORY. THE USE OF THESE MATERIALS FOR ADVERTISING, MARKETING OR ANY OTHER COMMERCIAL PURPOSE IS STRICTLY PROH
(c) Dukas -
DUK10147814_002
FEATURE - Ukrainische Architekten entwerfen Stadt für den Mars
Ukrainian architects Makhno Studio have designed a spectacular settlement for Mars utilising 3-D printing technology.
Named Plan C, it is a bagel-shaped settlement located on the inside of a crater - protecting it from Martian sandstorms, meteor showers and solar radiation.
The outer walls of Plan C would be made using giant 3D-printers due to the difficulty humans would face in constructing an environment without spacesuits, oxygen devices, and life support machines.
The interiors are designed to blur the aesthetics of Earth and Mars - featuring rock-like furnishings. A large plant-filled hall will stretch the length of the ring-shaped structure connect different parts of the settlement.
Phyto-lighting, ultraviolet and infrared lighting will promote plant growth and help them convert carbon dioxide and water into oxygen.
Additional spaces will include medical care zones, research centres that monitor planetary and atmospheric conditions, chemical and biological laboratories and administrative quarters,
The settlement will also be able to grow its own fruit and vegetables in spherical greenhouses fitted with Phyto-lamps were. These are designed to look like small planets.
The sleeping quarters are sparse - with only essential furniture for two people. But do agave a screen covering the ceiling to enable residents to pass the time by watching films. It will also feature a gym and fitness facility centre to prevent conditions like muscle atrophy, which can occur due to low gravity conditions. This will feature exercise bikes and narrow swimming pools that will help people adjust to the low-gravity conditions. To help residents keep calm, there will also be floating capsules for recovery and relaxation."
Where: Kiev, Ukraine
When: 24 Jan 2022
Credit: Makhno/Cover Images
**EDITORIAL USE ONLY. MATERIALS ONLY TO BE USED IN CONJUNCTION WITH EDITORIAL STORY. THE USE OF THESE MATERIALS FOR ADVERTISING, MARKETING OR ANY OTHER COMMERCIAL PURPOSE IS STRICTLY PROH
(c) Dukas -
DUK10147814_001
FEATURE - Ukrainische Architekten entwerfen Stadt für den Mars
Ukrainian architects Makhno Studio have designed a spectacular settlement for Mars utilising 3-D printing technology.
Named Plan C, it is a bagel-shaped settlement located on the inside of a crater - protecting it from Martian sandstorms, meteor showers and solar radiation.
The outer walls of Plan C would be made using giant 3D-printers due to the difficulty humans would face in constructing an environment without spacesuits, oxygen devices, and life support machines.
The interiors are designed to blur the aesthetics of Earth and Mars - featuring rock-like furnishings. A large plant-filled hall will stretch the length of the ring-shaped structure connect different parts of the settlement.
Phyto-lighting, ultraviolet and infrared lighting will promote plant growth and help them convert carbon dioxide and water into oxygen.
Additional spaces will include medical care zones, research centres that monitor planetary and atmospheric conditions, chemical and biological laboratories and administrative quarters,
The settlement will also be able to grow its own fruit and vegetables in spherical greenhouses fitted with Phyto-lamps were. These are designed to look like small planets.
The sleeping quarters are sparse - with only essential furniture for two people. But do agave a screen covering the ceiling to enable residents to pass the time by watching films. It will also feature a gym and fitness facility centre to prevent conditions like muscle atrophy, which can occur due to low gravity conditions. This will feature exercise bikes and narrow swimming pools that will help people adjust to the low-gravity conditions. To help residents keep calm, there will also be floating capsules for recovery and relaxation."
Where: Kiev, Ukraine
When: 24 Jan 2022
Credit: Makhno/Cover Images
**EDITORIAL USE ONLY. MATERIALS ONLY TO BE USED IN CONJUNCTION WITH EDITORIAL STORY. THE USE OF THESE MATERIALS FOR ADVERTISING, MARKETING OR ANY OTHER COMMERCIAL PURPOSE IS STRICTLY PROH
(c) Dukas -
DUK10147331_004
NEWS - Chinas Tianwen 1 sendet Selfie aus der Marsumlaufbahn
Mandatory Credit: Photo by CNSA/UPI/Shutterstock (12694136b)
The China National Space Administration published a stunning martian selfie captured by the Tianwen-1 Mars orbiter above the Red Planet after releasing a small camera and beaming photos via WiFi to mission control. The photographs show the orbiter flying around the Red Planet in an orbit, the ice cover on Mars' north pole, and a scene of a barren Martian plain.
China's Tianwen 1 Transmits Selfie from Mars' Orbit, Beijing - 04 Jan 2022
(c) Dukas -
DUK10147331_003
NEWS - Chinas Tianwen 1 sendet Selfie aus der Marsumlaufbahn
Mandatory Credit: Photo by CNSA/UPI/Shutterstock (12694136c)
The China National Space Administration published a stunning martian selfie captured by the Tianwen-1 Mars orbiter above the Red Planet after releasing a small camera and beaming photos via WiFi to mission control. The photographs show the orbiter flying around the Red Planet in an orbit, the ice cover on Mars' north pole, and a scene of a barren Martian plain.
China's Tianwen 1 Transmits Selfie from Mars' Orbit, Beijing - 04 Jan 2022
(c) Dukas -
DUK10147331_002
NEWS - Chinas Tianwen 1 sendet Selfie aus der Marsumlaufbahn
Mandatory Credit: Photo by CNSA/UPI/Shutterstock (12694136d)
The China National Space Administration published a stunning martian selfie captured by the Tianwen-1 Mars orbiter above the Red Planet after releasing a small camera and beaming photos via WiFi to mission control. The photographs show the orbiter flying around the Red Planet in an orbit, the ice cover on Mars' north pole, and a scene of a barren Martian plain.
China's Tianwen 1 Transmits Selfie from Mars' Orbit, Beijing - 04 Jan 2022
(c) Dukas -
DUK10147331_001
NEWS - Chinas Tianwen 1 sendet Selfie aus der Marsumlaufbahn
Mandatory Credit: Photo by CNSA/UPI/Shutterstock (12694136a)
The China National Space Administration published a stunning martian selfie captured by the Tianwen-1 Mars orbiter above the Red Planet after releasing a small camera and beaming photos via WiFi to mission control. The photographs show the orbiter flying around the Red Planet in an orbit, the ice cover on Mars' north pole, and a scene of a barren Martian plain.
China's Tianwen 1 Transmits Selfie from Mars' Orbit, Beijing - 04 Jan 2022
(c) Dukas -
DUK10124437_041
FEATURE - 'Moving to Mars' Ausstellung im Design Museum in London
Mandatory Credit: Photo by Nils Jorgensen/REX (10448465as)
ESA Solero research model of Martian rover
'Moving to Mars' exhibition, Design Museum, London, UK - 17 Oct 2019
Moving to Mars, a new exhibition which explores what it would be like to live on Mars, at The Design Museum
(c) Dukas -
DUK10124437_039
FEATURE - 'Moving to Mars' Ausstellung im Design Museum in London
Mandatory Credit: Photo by Nils Jorgensen/REX (10448465at)
ESA Solero research model of Martian rover
'Moving to Mars' exhibition, Design Museum, London, UK - 17 Oct 2019
Moving to Mars, a new exhibition which explores what it would be like to live on Mars, at The Design Museum
(c) Dukas -
DUK10043198_020
FEATURE - Der 'Mars' auf dem Trafalgar Square
Mandatory Credit: Photo by REX/Shutterstock (7427315e)
Martian landscape in Trafalgar Square
Martian landscape created in Trafalgar Square to launch new National Geographic TV show 'MARS', London, UK - 07 Nov 2016
London's Trafalgar Square has been turned into a Martian landscape, featuring the Mars Rover prototype 'Bridget', to mark the launch of new National Geographic television series 'MARS'. The 400 square metre replica landscape, using imagery from the surface of Mars, was constructed on Trafalgar Square, complete with chasms, craters and canyons. To complete the transformation into the Red Planet, specialist designers meticulously created 3D fibreglass rock sculptures to replicate the Martian surface geology. The new six-part series, airing from November 13th, which has been produced by Academy Award- and Emmy-winning Brian Grazer, Ron Howard and Michael Rosenberg, follows a fictitious crew's mission to Mars in 2033 and combines unparalleled visual effects with present day documentary storytelling.
(FOTO:DUKAS/REX)
(c) Dukas -
DUK10043198_027
FEATURE - Der 'Mars' auf dem Trafalgar Square
Mandatory Credit: Photo by REX/Shutterstock (7427315n)
Martian landscape in Trafalgar Square
Martian landscape created in Trafalgar Square to launch new National Geographic TV show 'MARS', London, UK - 07 Nov 2016
London's Trafalgar Square has been turned into a Martian landscape, featuring the Mars Rover prototype 'Bridget', to mark the launch of new National Geographic television series 'MARS'. The 400 square metre replica landscape, using imagery from the surface of Mars, was constructed on Trafalgar Square, complete with chasms, craters and canyons. To complete the transformation into the Red Planet, specialist designers meticulously created 3D fibreglass rock sculptures to replicate the Martian surface geology. The new six-part series, airing from November 13th, which has been produced by Academy Award- and Emmy-winning Brian Grazer, Ron Howard and Michael Rosenberg, follows a fictitious crew's mission to Mars in 2033 and combines unparalleled visual effects with present day documentary storytelling.
(FOTO:DUKAS/REX)
(c) Dukas -
DUK10043198_016
FEATURE - Der 'Mars' auf dem Trafalgar Square
Mandatory Credit: Photo by REX/Shutterstock (7427315b)
Martian landscape in Trafalgar Square
Martian landscape created in Trafalgar Square to launch new National Geographic TV show 'MARS', London, UK - 07 Nov 2016
London's Trafalgar Square has been turned into a Martian landscape, featuring the Mars Rover prototype 'Bridget', to mark the launch of new National Geographic television series 'MARS'. The 400 square metre replica landscape, using imagery from the surface of Mars, was constructed on Trafalgar Square, complete with chasms, craters and canyons. To complete the transformation into the Red Planet, specialist designers meticulously created 3D fibreglass rock sculptures to replicate the Martian surface geology. The new six-part series, airing from November 13th, which has been produced by Academy Award- and Emmy-winning Brian Grazer, Ron Howard and Michael Rosenberg, follows a fictitious crew's mission to Mars in 2033 and combines unparalleled visual effects with present day documentary storytelling.
(FOTO:DUKAS/REX)
(c) Dukas -
DUK10043198_028
FEATURE - Der 'Mars' auf dem Trafalgar Square
Mandatory Credit: Photo by REX/Shutterstock (7427315m)
Martian landscape in Trafalgar Square
Martian landscape created in Trafalgar Square to launch new National Geographic TV show 'MARS', London, UK - 07 Nov 2016
London's Trafalgar Square has been turned into a Martian landscape, featuring the Mars Rover prototype 'Bridget', to mark the launch of new National Geographic television series 'MARS'. The 400 square metre replica landscape, using imagery from the surface of Mars, was constructed on Trafalgar Square, complete with chasms, craters and canyons. To complete the transformation into the Red Planet, specialist designers meticulously created 3D fibreglass rock sculptures to replicate the Martian surface geology. The new six-part series, airing from November 13th, which has been produced by Academy Award- and Emmy-winning Brian Grazer, Ron Howard and Michael Rosenberg, follows a fictitious crew's mission to Mars in 2033 and combines unparalleled visual effects with present day documentary storytelling.
(FOTO:DUKAS/REX)
(c) Dukas -
DUK10043198_015
FEATURE - Der 'Mars' auf dem Trafalgar Square
Mandatory Credit: Photo by REX/Shutterstock (7427315a)
Martian landscape in Trafalgar Square
Martian landscape created in Trafalgar Square to launch new National Geographic TV show 'MARS', London, UK - 07 Nov 2016
London's Trafalgar Square has been turned into a Martian landscape, featuring the Mars Rover prototype 'Bridget', to mark the launch of new National Geographic television series 'MARS'. The 400 square metre replica landscape, using imagery from the surface of Mars, was constructed on Trafalgar Square, complete with chasms, craters and canyons. To complete the transformation into the Red Planet, specialist designers meticulously created 3D fibreglass rock sculptures to replicate the Martian surface geology. The new six-part series, airing from November 13th, which has been produced by Academy Award- and Emmy-winning Brian Grazer, Ron Howard and Michael Rosenberg, follows a fictitious crew's mission to Mars in 2033 and combines unparalleled visual effects with present day documentary storytelling.
(FOTO:DUKAS/REX)
(c) Dukas -
DUK10043198_018
FEATURE - Der 'Mars' auf dem Trafalgar Square
Mandatory Credit: Photo by REX/Shutterstock (7427315d)
Martian landscape in Trafalgar Square
Martian landscape created in Trafalgar Square to launch new National Geographic TV show 'MARS', London, UK - 07 Nov 2016
London's Trafalgar Square has been turned into a Martian landscape, featuring the Mars Rover prototype 'Bridget', to mark the launch of new National Geographic television series 'MARS'. The 400 square metre replica landscape, using imagery from the surface of Mars, was constructed on Trafalgar Square, complete with chasms, craters and canyons. To complete the transformation into the Red Planet, specialist designers meticulously created 3D fibreglass rock sculptures to replicate the Martian surface geology. The new six-part series, airing from November 13th, which has been produced by Academy Award- and Emmy-winning Brian Grazer, Ron Howard and Michael Rosenberg, follows a fictitious crew's mission to Mars in 2033 and combines unparalleled visual effects with present day documentary storytelling.
(FOTO:DUKAS/REX)
(c) Dukas -
DUK10043198_025
FEATURE - Der 'Mars' auf dem Trafalgar Square
Mandatory Credit: Photo by REX/Shutterstock (7427315l)
Martian landscape in Trafalgar Square
Martian landscape created in Trafalgar Square to launch new National Geographic TV show 'MARS', London, UK - 07 Nov 2016
London's Trafalgar Square has been turned into a Martian landscape, featuring the Mars Rover prototype 'Bridget', to mark the launch of new National Geographic television series 'MARS'. The 400 square metre replica landscape, using imagery from the surface of Mars, was constructed on Trafalgar Square, complete with chasms, craters and canyons. To complete the transformation into the Red Planet, specialist designers meticulously created 3D fibreglass rock sculptures to replicate the Martian surface geology. The new six-part series, airing from November 13th, which has been produced by Academy Award- and Emmy-winning Brian Grazer, Ron Howard and Michael Rosenberg, follows a fictitious crew's mission to Mars in 2033 and combines unparalleled visual effects with present day documentary storytelling.
(FOTO:DUKAS/REX)
(c) Dukas -
DUK10043198_022
FEATURE - Der 'Mars' auf dem Trafalgar Square
Mandatory Credit: Photo by REX/Shutterstock (7427315g)
Martian landscape in Trafalgar Square
Martian landscape created in Trafalgar Square to launch new National Geographic TV show 'MARS', London, UK - 07 Nov 2016
London's Trafalgar Square has been turned into a Martian landscape, featuring the Mars Rover prototype 'Bridget', to mark the launch of new National Geographic television series 'MARS'. The 400 square metre replica landscape, using imagery from the surface of Mars, was constructed on Trafalgar Square, complete with chasms, craters and canyons. To complete the transformation into the Red Planet, specialist designers meticulously created 3D fibreglass rock sculptures to replicate the Martian surface geology. The new six-part series, airing from November 13th, which has been produced by Academy Award- and Emmy-winning Brian Grazer, Ron Howard and Michael Rosenberg, follows a fictitious crew's mission to Mars in 2033 and combines unparalleled visual effects with present day documentary storytelling.
(FOTO:DUKAS/REX)
(c) Dukas -
DUK10043198_026
FEATURE - Der 'Mars' auf dem Trafalgar Square
Mandatory Credit: Photo by REX/Shutterstock (7427315k)
Martian landscape in Trafalgar Square
Martian landscape created in Trafalgar Square to launch new National Geographic TV show 'MARS', London, UK - 07 Nov 2016
London's Trafalgar Square has been turned into a Martian landscape, featuring the Mars Rover prototype 'Bridget', to mark the launch of new National Geographic television series 'MARS'. The 400 square metre replica landscape, using imagery from the surface of Mars, was constructed on Trafalgar Square, complete with chasms, craters and canyons. To complete the transformation into the Red Planet, specialist designers meticulously created 3D fibreglass rock sculptures to replicate the Martian surface geology. The new six-part series, airing from November 13th, which has been produced by Academy Award- and Emmy-winning Brian Grazer, Ron Howard and Michael Rosenberg, follows a fictitious crew's mission to Mars in 2033 and combines unparalleled visual effects with present day documentary storytelling.
(FOTO:DUKAS/REX)
(c) Dukas -
DUK10043198_017
FEATURE - Der 'Mars' auf dem Trafalgar Square
Mandatory Credit: Photo by REX/Shutterstock (7427315c)
Martian landscape in Trafalgar Square
Martian landscape created in Trafalgar Square to launch new National Geographic TV show 'MARS', London, UK - 07 Nov 2016
London's Trafalgar Square has been turned into a Martian landscape, featuring the Mars Rover prototype 'Bridget', to mark the launch of new National Geographic television series 'MARS'. The 400 square metre replica landscape, using imagery from the surface of Mars, was constructed on Trafalgar Square, complete with chasms, craters and canyons. To complete the transformation into the Red Planet, specialist designers meticulously created 3D fibreglass rock sculptures to replicate the Martian surface geology. The new six-part series, airing from November 13th, which has been produced by Academy Award- and Emmy-winning Brian Grazer, Ron Howard and Michael Rosenberg, follows a fictitious crew's mission to Mars in 2033 and combines unparalleled visual effects with present day documentary storytelling.
(FOTO:DUKAS/REX)
(c) Dukas -
DUK10043198_024
FEATURE - Der 'Mars' auf dem Trafalgar Square
Mandatory Credit: Photo by REX/Shutterstock (7427315j)
Martian landscape in Trafalgar Square
Martian landscape created in Trafalgar Square to launch new National Geographic TV show 'MARS', London, UK - 07 Nov 2016
London's Trafalgar Square has been turned into a Martian landscape, featuring the Mars Rover prototype 'Bridget', to mark the launch of new National Geographic television series 'MARS'. The 400 square metre replica landscape, using imagery from the surface of Mars, was constructed on Trafalgar Square, complete with chasms, craters and canyons. To complete the transformation into the Red Planet, specialist designers meticulously created 3D fibreglass rock sculptures to replicate the Martian surface geology. The new six-part series, airing from November 13th, which has been produced by Academy Award- and Emmy-winning Brian Grazer, Ron Howard and Michael Rosenberg, follows a fictitious crew's mission to Mars in 2033 and combines unparalleled visual effects with present day documentary storytelling.
(FOTO:DUKAS/REX)
(c) Dukas -
DUK10043198_019
FEATURE - Der 'Mars' auf dem Trafalgar Square
Mandatory Credit: Photo by REX/Shutterstock (7427315f)
Martian landscape in Trafalgar Square
Martian landscape created in Trafalgar Square to launch new National Geographic TV show 'MARS', London, UK - 07 Nov 2016
London's Trafalgar Square has been turned into a Martian landscape, featuring the Mars Rover prototype 'Bridget', to mark the launch of new National Geographic television series 'MARS'. The 400 square metre replica landscape, using imagery from the surface of Mars, was constructed on Trafalgar Square, complete with chasms, craters and canyons. To complete the transformation into the Red Planet, specialist designers meticulously created 3D fibreglass rock sculptures to replicate the Martian surface geology. The new six-part series, airing from November 13th, which has been produced by Academy Award- and Emmy-winning Brian Grazer, Ron Howard and Michael Rosenberg, follows a fictitious crew's mission to Mars in 2033 and combines unparalleled visual effects with present day documentary storytelling.
(FOTO:DUKAS/REX)
(c) Dukas -
DUK10043198_021
FEATURE - Der 'Mars' auf dem Trafalgar Square
Mandatory Credit: Photo by REX/Shutterstock (7427315h)
Martian landscape in Trafalgar Square
Martian landscape created in Trafalgar Square to launch new National Geographic TV show 'MARS', London, UK - 07 Nov 2016
London's Trafalgar Square has been turned into a Martian landscape, featuring the Mars Rover prototype 'Bridget', to mark the launch of new National Geographic television series 'MARS'. The 400 square metre replica landscape, using imagery from the surface of Mars, was constructed on Trafalgar Square, complete with chasms, craters and canyons. To complete the transformation into the Red Planet, specialist designers meticulously created 3D fibreglass rock sculptures to replicate the Martian surface geology. The new six-part series, airing from November 13th, which has been produced by Academy Award- and Emmy-winning Brian Grazer, Ron Howard and Michael Rosenberg, follows a fictitious crew's mission to Mars in 2033 and combines unparalleled visual effects with present day documentary storytelling.
(FOTO:DUKAS/REX)
(c) Dukas -
DUK10043198_023
FEATURE - Der 'Mars' auf dem Trafalgar Square
Mandatory Credit: Photo by REX/Shutterstock (7427315i)
Martian landscape in Trafalgar Square
Martian landscape created in Trafalgar Square to launch new National Geographic TV show 'MARS', London, UK - 07 Nov 2016
London's Trafalgar Square has been turned into a Martian landscape, featuring the Mars Rover prototype 'Bridget', to mark the launch of new National Geographic television series 'MARS'. The 400 square metre replica landscape, using imagery from the surface of Mars, was constructed on Trafalgar Square, complete with chasms, craters and canyons. To complete the transformation into the Red Planet, specialist designers meticulously created 3D fibreglass rock sculptures to replicate the Martian surface geology. The new six-part series, airing from November 13th, which has been produced by Academy Award- and Emmy-winning Brian Grazer, Ron Howard and Michael Rosenberg, follows a fictitious crew's mission to Mars in 2033 and combines unparalleled visual effects with present day documentary storytelling.
(FOTO:DUKAS/REX)
(c) Dukas -
DUK10043198_010
FEATURE - Der 'Mars' auf dem Trafalgar Square
Mandatory Credit: Photo by Joe Pepler/REX/Shutterstock (7423132i)
Martian landscape in Trafalgar Square
Martian landscape created in Trafalgar Square to launch new National Geographic TV show 'MARS', London, UK - 07 Nov 2016
London's Trafalgar Square has been turned into a Martian landscape, featuring the Mars Rover prototype 'Bridget', to mark the launch of new National Geographic television series 'MARS'. The 400 square metre replica landscape, using imagery from the surface of Mars, was constructed on Trafalgar Square, complete with chasms, craters and canyons. To complete the transformation into the Red Planet, specialist designers meticulously created 3D fibreglass rock sculptures to replicate the Martian surface geology. The new six-part series, airing from November 13th, which has been produced by Academy Award- and Emmy-winning Brian Grazer, Ron Howard and Michael Rosenberg, follows a fictitious crew's mission to Mars in 2033 and combines unparalleled visual effects with present day documentary storytelling.
(FOTO:DUKAS/REX)
(c) Dukas -
DUK10043198_001
FEATURE - Der 'Mars' auf dem Trafalgar Square
Mandatory Credit: Photo by Joe Pepler/REX/Shutterstock (7423132a)
Martian landscape in Trafalgar Square
Martian landscape created in Trafalgar Square to launch new National Geographic TV show 'MARS', London, UK - 07 Nov 2016
London's Trafalgar Square has been turned into a Martian landscape, featuring the Mars Rover prototype 'Bridget', to mark the launch of new National Geographic television series 'MARS'. The 400 square metre replica landscape, using imagery from the surface of Mars, was constructed on Trafalgar Square, complete with chasms, craters and canyons. To complete the transformation into the Red Planet, specialist designers meticulously created 3D fibreglass rock sculptures to replicate the Martian surface geology. The new six-part series, airing from November 13th, which has been produced by Academy Award- and Emmy-winning Brian Grazer, Ron Howard and Michael Rosenberg, follows a fictitious crew's mission to Mars in 2033 and combines unparalleled visual effects with present day documentary storytelling.
(FOTO:DUKAS/REX)
(c) Dukas -
DUK10043198_008
FEATURE - Der 'Mars' auf dem Trafalgar Square
Mandatory Credit: Photo by Joe Pepler/REX/Shutterstock (7423132b)
Martian landscape in Trafalgar Square
Martian landscape created in Trafalgar Square to launch new National Geographic TV show 'MARS', London, UK - 07 Nov 2016
London's Trafalgar Square has been turned into a Martian landscape, featuring the Mars Rover prototype 'Bridget', to mark the launch of new National Geographic television series 'MARS'. The 400 square metre replica landscape, using imagery from the surface of Mars, was constructed on Trafalgar Square, complete with chasms, craters and canyons. To complete the transformation into the Red Planet, specialist designers meticulously created 3D fibreglass rock sculptures to replicate the Martian surface geology. The new six-part series, airing from November 13th, which has been produced by Academy Award- and Emmy-winning Brian Grazer, Ron Howard and Michael Rosenberg, follows a fictitious crew's mission to Mars in 2033 and combines unparalleled visual effects with present day documentary storytelling.
(FOTO:DUKAS/REX)
(c) Dukas -
DUK10043198_002
FEATURE - Der 'Mars' auf dem Trafalgar Square
Mandatory Credit: Photo by Joe Pepler/REX/Shutterstock (7423132h)
Martian landscape in Trafalgar Square
Martian landscape created in Trafalgar Square to launch new National Geographic TV show 'MARS', London, UK - 07 Nov 2016
London's Trafalgar Square has been turned into a Martian landscape, featuring the Mars Rover prototype 'Bridget', to mark the launch of new National Geographic television series 'MARS'. The 400 square metre replica landscape, using imagery from the surface of Mars, was constructed on Trafalgar Square, complete with chasms, craters and canyons. To complete the transformation into the Red Planet, specialist designers meticulously created 3D fibreglass rock sculptures to replicate the Martian surface geology. The new six-part series, airing from November 13th, which has been produced by Academy Award- and Emmy-winning Brian Grazer, Ron Howard and Michael Rosenberg, follows a fictitious crew's mission to Mars in 2033 and combines unparalleled visual effects with present day documentary storytelling.
(FOTO:DUKAS/REX)
(c) Dukas -
DUK10043198_007
FEATURE - Der 'Mars' auf dem Trafalgar Square
Mandatory Credit: Photo by Joe Pepler/REX/Shutterstock (7423132j)
Martian landscape in Trafalgar Square
Martian landscape created in Trafalgar Square to launch new National Geographic TV show 'MARS', London, UK - 07 Nov 2016
London's Trafalgar Square has been turned into a Martian landscape, featuring the Mars Rover prototype 'Bridget', to mark the launch of new National Geographic television series 'MARS'. The 400 square metre replica landscape, using imagery from the surface of Mars, was constructed on Trafalgar Square, complete with chasms, craters and canyons. To complete the transformation into the Red Planet, specialist designers meticulously created 3D fibreglass rock sculptures to replicate the Martian surface geology. The new six-part series, airing from November 13th, which has been produced by Academy Award- and Emmy-winning Brian Grazer, Ron Howard and Michael Rosenberg, follows a fictitious crew's mission to Mars in 2033 and combines unparalleled visual effects with present day documentary storytelling.
(FOTO:DUKAS/REX)
(c) Dukas -
DUK10043198_005
FEATURE - Der 'Mars' auf dem Trafalgar Square
Mandatory Credit: Photo by Joe Pepler/REX/Shutterstock (7423132f)
Martian landscape in Trafalgar Square
Martian landscape created in Trafalgar Square to launch new National Geographic TV show 'MARS', London, UK - 07 Nov 2016
London's Trafalgar Square has been turned into a Martian landscape, featuring the Mars Rover prototype 'Bridget', to mark the launch of new National Geographic television series 'MARS'. The 400 square metre replica landscape, using imagery from the surface of Mars, was constructed on Trafalgar Square, complete with chasms, craters and canyons. To complete the transformation into the Red Planet, specialist designers meticulously created 3D fibreglass rock sculptures to replicate the Martian surface geology. The new six-part series, airing from November 13th, which has been produced by Academy Award- and Emmy-winning Brian Grazer, Ron Howard and Michael Rosenberg, follows a fictitious crew's mission to Mars in 2033 and combines unparalleled visual effects with present day documentary storytelling.
(FOTO:DUKAS/REX)
(c) Dukas -
DUK10043198_003
FEATURE - Der 'Mars' auf dem Trafalgar Square
Mandatory Credit: Photo by Joe Pepler/REX/Shutterstock (7423132g)
Martian landscape in Trafalgar Square
Martian landscape created in Trafalgar Square to launch new National Geographic TV show 'MARS', London, UK - 07 Nov 2016
London's Trafalgar Square has been turned into a Martian landscape, featuring the Mars Rover prototype 'Bridget', to mark the launch of new National Geographic television series 'MARS'. The 400 square metre replica landscape, using imagery from the surface of Mars, was constructed on Trafalgar Square, complete with chasms, craters and canyons. To complete the transformation into the Red Planet, specialist designers meticulously created 3D fibreglass rock sculptures to replicate the Martian surface geology. The new six-part series, airing from November 13th, which has been produced by Academy Award- and Emmy-winning Brian Grazer, Ron Howard and Michael Rosenberg, follows a fictitious crew's mission to Mars in 2033 and combines unparalleled visual effects with present day documentary storytelling.
(FOTO:DUKAS/REX)
(c) Dukas -
DUK10043198_006
FEATURE - Der 'Mars' auf dem Trafalgar Square
Mandatory Credit: Photo by Joe Pepler/REX/Shutterstock (7423132c)
Martian landscape in Trafalgar Square
Martian landscape created in Trafalgar Square to launch new National Geographic TV show 'MARS', London, UK - 07 Nov 2016
London's Trafalgar Square has been turned into a Martian landscape, featuring the Mars Rover prototype 'Bridget', to mark the launch of new National Geographic television series 'MARS'. The 400 square metre replica landscape, using imagery from the surface of Mars, was constructed on Trafalgar Square, complete with chasms, craters and canyons. To complete the transformation into the Red Planet, specialist designers meticulously created 3D fibreglass rock sculptures to replicate the Martian surface geology. The new six-part series, airing from November 13th, which has been produced by Academy Award- and Emmy-winning Brian Grazer, Ron Howard and Michael Rosenberg, follows a fictitious crew's mission to Mars in 2033 and combines unparalleled visual effects with present day documentary storytelling.
(FOTO:DUKAS/REX)
(c) Dukas -
DUK10043198_009
FEATURE - Der 'Mars' auf dem Trafalgar Square
Mandatory Credit: Photo by Joe Pepler/REX/Shutterstock (7423132e)
Martian landscape in Trafalgar Square
Martian landscape created in Trafalgar Square to launch new National Geographic TV show 'MARS', London, UK - 07 Nov 2016
London's Trafalgar Square has been turned into a Martian landscape, featuring the Mars Rover prototype 'Bridget', to mark the launch of new National Geographic television series 'MARS'. The 400 square metre replica landscape, using imagery from the surface of Mars, was constructed on Trafalgar Square, complete with chasms, craters and canyons. To complete the transformation into the Red Planet, specialist designers meticulously created 3D fibreglass rock sculptures to replicate the Martian surface geology. The new six-part series, airing from November 13th, which has been produced by Academy Award- and Emmy-winning Brian Grazer, Ron Howard and Michael Rosenberg, follows a fictitious crew's mission to Mars in 2033 and combines unparalleled visual effects with present day documentary storytelling.
(FOTO:DUKAS/REX)
(c) Dukas -
